2365151-1-S-Whirlpool-12656106-Pantry End Cap - Left Side
2365151-1-S-Whirlpool-12656106-Pantry End Cap - Left Side 2365151-2-S-Whirlpool-12656106-Pantry End Cap - Left Side

Pantry End Cap - Left Side

PartSelect Number PS2365151

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Compare At

    $23.02
  • You Save

    $3.84
  • Your Price

    $19.18
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Pantry End Cap - Right Side

Part Number 2365144

Sold individually.

$18.84
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 77 reviews What's this?
 

1 of 3 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Wrench set

CustomerGregory from Hooksett NH

Small piece broke off

After removing the shelving in the refrigerator to access the pantry slide out panel I removed the metal sliding rails that the pantry drawer rides on and put them aside. I then used s 1/4" hex socket screw driver and removed the 3 screws holding the part in place. After wiping the area of any moisture from the humidity on the plastic I screwed the new part in place and then attached the sliding rails and replaced all the draws I had removed ealier. Total time was no more than 15 minutes!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerBill from Seattle WA

Hinge pin support for slideout drawer cover broke.

Ordering the part was easy. Part came in a few days. I was able to install the part in a little over 15 minutes. Used a 1/4 inch nut driver. Three screws . Done! Happy wife!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerTeresa from San Jose CA

Crisper lid wuold not open when drawer pulled fwd.

Replaced Lesf side Pantry End cap. Directions on web site easy to understand.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerEvan from Orlando FL

Hinge snapped off of pantry drawer lid

Simple- I removed the food, drawers, and shelving from the unit. I unscrewed the 2 screws holding the end cap on. Once removed I also separated the sliding track from the old part and put it on the new part. I then screwed the new end cap into place using the same screws as the old one. I put the shelves, drawers, and the food back in. All in less than 10 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerCathy from San Pedro CA

Tab that held on pantry door had broken off.

Took all the shelves and drawers off above part to be replaced and cleaned them. Removed old part and replaced with new.May I add new part fit perfectly!. No major problems encountered. Tip: remember where all parts were removed from!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerAndrew from Albony OR

Broken round pantry door piviot.

Removed pantry and glass shelves. Remove three small screws. Pop out end cap and remove drawer rail(two phillips screws). Reinstall on new end cap and place back in refer with three screws. Reinstall glass shelves and pantry. Job complete!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerKarl from Kremmling CO

Broke pin on lid for pantry

Took of slider for drawer and put them on new part. Unscrewed three screws, took of old part and put on new part and screwed on. If I can do it anyone can.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

CustomerSid from Sacramento CA

Broken pantry door hinge

Very quick, three screws and it came out Took rack off old piece and added it to the new part. Screwed back on 5 minutes. 3 years with broken hinge and 5minutes to replace. The parts shipped quick had it two days from purchase. I will use this for future appliance repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerVirginia from Grand Prairie TX

A plastick part broke off

Removed the original part and replaced it with new part

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerTIMOTHY from WEST HILLS CA

Latch on lid broke off.

Remove drawers and shelf. Slide out bottom tray. Remove 2 nut screws from side panel. Pop out old panel. Remove drawer sliders. Reattach sliders to new panel. Pop in new panel and tighten screws. Reinstall shelf and drawers.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerBarbara from Ogden UT

The small projection that holds the lid to the deli drawer broke off. The other side broke off before and I replaced the right end cap at that time

I removed the vegetable drawers and glass. Removed the deli drawer and glass. I then used a small nutdriver to remove the small hexhead screw. Once removed I unscrewed the metal slider and screwed it to the new part. I screwed the new part in where I removed the old one. It was pretty easy. I just wish they made that part that breaks off so easily out of metal. I am frustrated by the number of times I need to replace it. PartSelect is great at delivering the part fast.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

Customershellie from Hanover MI

Both tabs on both the pantry lt and rt side broke off

I used a nut driver to remove the screws and took out both right and left end caps and put in the new ones it was so easy I couldn't believe it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRichard from Pocasset MA

Plastic hinge point had broken off of crisper drawer.

Repair was easy. I removed the food from tha refer and backed out four screws that help end cap in place. I replaced part and screwed it back in using a little locltite on the screws so they didn't work their way out. I then snapped the cover back onto the hinge points and put the food back in the refrigerator. Done

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

Customerstephen from geneva IL

Hinge broke on fridge pull out bottom "deli drawer"

Remove the two vegi drawers on the bottom.
Remove the glass covering for the top of "deli-drawer".
Remove the entire Deli drawer from the glides and put aside.
Remove the broken side using the nut driver (3 screws)
Transfer the drawer glides from broken part to new part (2 screws).
Put back the new plastic side and re attache to side of frig (3 screws, again).
Put back the drawer in the glides, works like an office file drawer with "clips" on the end.

Your done. My kids could do it. All of the time is spent removing the "stuff" and cleaning all the "yuck" that you find once you remove the bottom drawer. Un screwing and re attaching 5 screws takes less then 2 minutes. Quit thinking about this and save yourself 100$ by NOT calling a repair guy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerBrian from Derry NH

My kid closed the fridge door with the pantry lid open breaking the little tab that holds the glass lid on, could not repair with super glue .

removed the 2 fruit & vegtable bins, glass shelf then 2 nuts from the end cap. Instaled the new end cap and rest of stuff in less than 15 min. worked great ..

Help other customers find the most helpful instructions.

Were these instructions helpful?