2365144-1-M-Whirlpool-12656019-Pantry-End-Cap-Right-Side.jpg
2365144-1-S-Whirlpool-12656019-Pantry-End-Cap-Right-Side.jpg 2365144-2-S-Whirlpool-12656019-Pantry-End-Cap-Right-Side.jpg

Pantry End Cap - Right Side

PartSelect Number PS2365144

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Compare At

    $22.61
  • You Save

    $3.77
  • Your Price

    $18.84
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 102 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerCAROLE from ELLICOTT CITY MD

End cap broke off of the door hinge of the pantry tray

removed screws from the side and back of part and installed new part. This is a very poor design for Amana. This is the second time this part has broken in 5 years--first the left and then the right.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerSteve from Rolla MO

Pantry lid end cap "hinge tab" broken off

After removing the crisper and meat drawers, then the glass shelf, removal of the broken end cap was fairly simple and straight forward. I removed 2 hex headed screws with a nut driver. Next I removed the temp control linkage from the old end cap, reinstalled it onto the new end cap and remounted to the refrigerator and that was that. The most impressive part was how rediculously fast the shipping was for the part itself!! I ordered on a Thursday evening and it was on my porch Saturday morning!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerRichard from Whitehouse TX

A door pin had broken off of the rh enc cap.

I removed 2 trays and a glass plate. Then removed the broken cap. I removed the tray slide hardware from the broken enc cap and installed it on the new end cap. Then installed the end cap in the refrigerator and replaced the glass plate and 2 trays.

Everything fit properly and the job took about 20 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerDarick from Stoughton WI

Broken hinge tab

It was no surprise that this was an easy repair, but I must say that I was completely impressed that the part was on my door step in 24 hours with STANDARD shipping.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerRoger P from Pine Ridge FL

Broken hinge pin on pantry door end cap

1. Remove pantry cover and tray assembly.
2. Remove two Crispers above tray.
3. Remove glass and seal in rear.
4. Remove phillip screws, 2 or 3 holding right end cap to refrig body.
5. Pull end cap from wall to the left releasing temp valve from back of frig.
6. Remove side metal slider from end cap.
7. Dissasmble temp valve slider from endcap and rear cap.
8. Remove temp valve control knob and handle from end cap.
9.Put back together in reverse order being careful not to loose the styrofoam seal from hole in rear of frig

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerCharles from Veona KY

Tab broke off of the pantry lid

I first removed both crisper drawers.You then remove the glass top. With that out of the way you remove the two 1/4 inch screws out of the drawer track, then remove the three screws., be careful whenyou remove the part not to damage the lever contoling the tempeture. You then reverse the procedure. Not hard at all. Thae parts were fantastic. I would recommend the to everyone. Thank you very much.
Charlie.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerKenneth from Frankford MO

Pantry door hinge pin broke on end cap due to 3yr. Old forcefullness

After removing glass shelf and upper compartments to allow more head room I was able to unbolt the end-cap and remove slide action pieces. Then I attached slide action device to new end-cap; then bolted back in place. Caution; be gentle when removing and reattaching the slide device since these parts are made of plastic and could break. Oh; I did remove the metal drawer slide from the end-cap piece and attached to the new replacement part. My wife was happy since I cleaned all of the interior while inside also.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

Customerarnold from norwell MA

End cap pivot tab broke off that holds deli drawer door

removed produce drawers and upper shelf.removed
4 screws from end cap and drawer track.replaced end
cap and also reinstalled adjustment slider tab for
temperature adjustment.
i am a retired gas company appliance and heating
repairman,but i think most home owners that are a
little bit handy could do it. The only problem was that my
wife said that while I had it all apart I might as well
clean the whole refrigerator!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerLee from Burleson TX

Endcap. The arm holding cover for bottom tray broke.

Removed bottom tray and middle 2 trays. Removed glass cover on bottom tray. Removed 2 screws swung the endcap inward. removed from refrigerator. Unsnapped rear arm and sliding hardware, transfered to new endcap. reinstalled with 2 screws. The 3rd screw was never installed. However the sliding tray is working fine. Simple repair

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customerdavid from north plainfield NJ

Broken shelf and broken end cap post for crisper lid

Shelf is self explanatory. The end cap was removed with three screws. The most difficult part was the removal of the temp controls, not really that hard, and putting them back in the new endcap. The drawer slide had to be transferred as well and then the three screws went back in and I'm back in business.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerJack from Lummi Island WA

Plastic tip that the door hinged on broke off.

It took longer to remove the crispers than it took to replace the part.
The parts drawing was easy and your service was really quick.
Thank you
Jack

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerJAMES from fallston MD

Flimsy right pin on deli drawer snapped (terrible design!)

Removed Crisper Drawers and Glass Panel & Rail above Deli Drawer. Removed two screws and carefully removed the 3 pieces that comprise the temperature control knob and arms from their channels. Replaced Right Endcap and reassembled. Hardest part was not breaking the thin control arms as I slid them back into place. Just a shade under 20 minutes to swap out. PartSelect.com delivered the part very fast! I have them bookmarked.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLarry from Bellevue NE

Broken plastic door hinge

Super fast delivery, 4 screws and the old part was out. Cleaned hidden spots in the frig took the longest. 4 screws and it was back in. Took a couple minutes to figure out how to set the plastic conections in the back.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerCarol from Rancho cucamonga CA

We broke the little nob that the snack drawer cover attaches to

It was pretty simple to pull out the snack drawer, remove the glass shelf and the front and back supports for the glass shelf. Then we removed the screws just for the end cap and pulled it out. We then had to remove the slide adjustment for the adjustable temperature control and positioned it onto the new Endcap. We then removed the metal slide that the drawer connects to and put it on the new endcap. Then we put the end camp back into the fridge and put all the screws back and put the refrigerator back together.

Take your time and pay attention to how you are taking things apart and you will easily be able to put things back together again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Pantry End Cap - Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerRichard from Mount Pocono PA

The poorly designed plastic pin on the endcap broke

I took the three screws out on the side panel after removing the drawers. The end cap pulls to the side and forward. I swaped the lever from the old cap to the new and re-installed the piece. It couldn't be easier. 5 min.

Help other customers find the most helpful instructions.

Were these instructions helpful?