| |
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerGreg from Seattle WA
I broke the right side hinge pin by not being careful
Was able see the part needed to be replaced from the pictures provided on the site. Part came in a few days. removed the old part and installed the parts in about 20 minutes
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerNed from Logansport IN
Broken hinge point.
I removed the storage drawers, glass shelf and the large drawer. Next I removed the two mounting screws and removed the Pantry End Cap. I moved the slide bar and the drawer guide the the new Pantry End Cap. Then I installed the new Pantry End Cap in the refrigerator and replaced the drawers and shelf. Last, I installed the drawer cover. Job Done!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
Customerdebra from marietta GA
Broke the tab trying to put the door back on after cleaning, it could be easier to put back on. Wont be taking it off any more
had ro take off three nuts then two screws that hold on the metal slider for the deli drawer.there are several other plastic parts toremove and put on the new part,but it was fairly easyto take apart and put back on.Have to be patient and pay attention to how they come of and go back on. I was very impressed with delivery, I orderd on line thursday night and recieved the part Saturday morning. thanks
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerMichael from Vancouver WA
The hinge for the pantry drawer door was broken.
I removed the pantry drawer, removed the pantry end cap and replaced it with the new part. The only thing that took a little thinking was detaching and reattaching the temperature control slider.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJudy from Manhattan KS
Pantry end cap-right side broke
Followed the diagram and other people's comments. A bit of trouble with the sliding part, but otherwise very simple to change out.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerJulie from Fountain Inn SC
Peg for the deli drawer lid broke - right side
Honestly, so simple . Removed the fruit / veggie drawers, glass shelf and the supports for that shelf. Couple of screws and nuts and it was off. As stated before... the most "thought goes into attaching the linkage for the temp adjustment on the right side . GREAT opportunity to CLEAN the up the fridge a bit!! Parts Select made this such a no brainer. Their Customer Service was really an added bonus!!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsSocket set
Customershellie from Hanover MI
Both tabs on both the pantry lt and rt side broke off
I used a nut driver to remove the screws and took out both right and left end caps and put in the new ones it was so easy I couldn't believe it.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers, Socket set
CustomerRICHARD from SANTA ANA CA
Right side pantry lid hinge tab broke
pulled out both crisper drawers, removed panrty drawer, removed drawer slide screws, removed right pantry end cap, gently removed temperature selecture slide assembly, then worked backewards from there with the new part. Not bad very easy,
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerJAMES from N MYRTLE BEACH SC
One of the tabs that hold up the door on the pantry drawer broke off
It literally took 5 mins. Remove the crisper drawers and pantry drawer for ease of access. Remove the 3 screws holding the end cap in place. Remove the glide from the old endcap and reattach it to the new part. Remove the humidity control arm from the old endcap and reattach to the new part (hardest part of the job - just takes a little finesse). Reinstall the new endcap and the drawers.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers, Socket set
CustomerJeanne from Fairport NY
The large, sliding drawer, mid-fridge, had a broken part
Actually, my daughter---who is much more mechanically-minded than I---did it. We had to borrow the socket set from a friend. It was relatively simple to do. Of course, the 'fix' led to needing to clean the 'fridge, so that really took the most effort!
Important to note here: THE QUICK RESPONSE OF PARTSELECT IN GETTING THE PARTS TO ME QUICKLY WAS AMAZING!!!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerBrenda from Spokane Valley WA
A common one, apparently. Right end cap broke off pantry drawer.
This was easy because I looked at other repair stories. What nobody mentioned is don't be afraid to swing the temperature control slider around after you get all the screws out. It just sort of hooks into a notch in the back of the cabinet. Pull the whole "L" toward you on a 90 degree swing and it will slip out. Then you can take it out and jiggle the rest of the parts to exchange them Also, if you have the screwdriver with the interchangeable tips you also have the nut driver you need. I was disappointed because I thought I would surprise my husband by doing it myself but didn't have a nut driver. Then I thought of the holder for the screwdriver tips and it was a perfect fit! Surprise.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerJohn from COLORADO SPGS CO
The deli lid attachment broke off
Literally removed two screws from the old unit, removed the humidity control from the old unit and put in on the new unit. Put the two screws back in and put the lid back on.
Your service saved us over $100 in a service call to get the unit repaired. The information from other people doing the same repair was valuable information.
Thanks
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
Customerelaine from Lincoln MA
The hinge on large drawer broke for a 2nd time
Having done it once before this time it went fairly easily.....there were NO instructions so one needs to take NOTE as you UNDO the broken side piece so you can reverse it as you put the new one in.
Hopefully this won't happen again!!
Part came in the mail within 2 DAYS OF ORDERING ! that was nice!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRichard from Montclair NJ
Deli bin track, right side and center rail, supporting meat and vegetable bins
Center rail, very easy to install. Be careful removing the glass shelf.
The right side deli bin track was pretty easy as well. Study the broken part to see how the slider fits on the track and the back side of the refrigerator. Best surprise was the prices. I thought these parts would be harder to find and more expensive.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsSocket set
CustomerGerald from Woodbury MN
Tab to hold door flap broke off original part
Removed the drawers, glass shelf, removed the three screws with a small socket set then took out broken part. I needed to unsnap some attached slide parts after removing the assembly. Attached removed parts from the old side piece to the new side part and replace the screwws initially removed. Then I snapped the shelf flip cover into the the new right and old left side. It is good as new now. It was quite easy once I figured out how to remove the sliding parts. It took more time to clean the shelf and bootom of the drawers than it did to replace the part.
|