| |
1 of 2 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
Customercharles from Duluth GA
Tab broken on end cap
had to take out three screws on the end cap and two on the bracket. Had to move a part over from the broken one. None of which were difficult.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers, Socket set
CustomerJohn from Stone Harbor NJ
End cap pin broke, required replacement of end cap
Following the excellent schematic on your site, I disassembled the RH drawer hardware and removed the damaged end cap, installed the new end cap, and re-assembled the drawer hardware.
The replacement part was delivered before I expected it and the schematic was accurate and very helpful. Well done, PartSelect, thanks.
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerVictor from Harbinger NC
Plastic broken
Direct part replacement. Very easy. Most importantly take your time. When ordering parts review drawings. Screws don't come with parts so save screws when taking it apart.
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers, Socket set
CustomerSuzanne from Crossville AL
Broken plastic chefs pantry door spendles
First. remove the two drawers and the glass shelf above them. Then using a hex socket remove the two hex head screws that hold the parts to the side of the fridge. Remove the metal drawer slides from the old part and apply them to the new part. If you are installing the left bracket reattach it to the fridge. If you are replacing the right side add the following steps. After attaching the slide to the new part remove the temp control assembly from the old part paying attention to how it fits together. Transfer to new part. Reattach new part to fridge. Carefully reattach pantry door to spindles. The hardest part was taking the temp control off of the old part and putting on the new part. I had made at least 5 calls to the store where I had purchased the refrigerator but I couldn't get them out to repair it. I decided to do it myself and I'm glad I did. It probably saved me at least $50.
|
1 of 3 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerByron from High Springs FL
Tab on right end cap broken
Removed vegetable drawers, glass top and two metal guards. Unhook clips on deli drawer slide brackets, then removed drawer. Removed two 5/16 hex head screws, unsnapped temp controlbracket at rear of ref. Removed end cap & temp bar. Removed slide, 2 - 5/16 hex head screws hold this on and temp control from old part, which unsnaps. Install these on new part. Reassemble end cap in frig. and all drawers as removed. Set Temp control to desired temp. I think this tab should be made of a more heavier material, as you can see this part breaks quite frequently.
|
2 of 6 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsSocket set
CustomerSusan from Lake Forest CA
Broken peg on pantry door
I had to remove the end cap inside the fridge since the peg holding the pantry door broke. It was really easy to repair but the tempurature adjuster gave me a little bit of trouble. However, the diagrams on this web site made the whole thing really easy to understand and I got the repair complete myself in about 20 minutes! Excellent parts supplier!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerDavid from Conroe TX
Broken hinge pin for pantry drawer
Removed the drawers, unscrewed 3 screws, positioned the new part, done. Very easy.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsSocket set
CustomerDavid from Butte MT
The pantry lid was warped and the hinge pin broken
this pantry lid was warped when the fridge was new. tolerated it for a while finally it cracked then worked pretty well for a couple years until the RH hinge pin (part of a support for the pantry door)broke. I had never bought parts from partselect.com before, but I have in the past bought repair parts from other sites. Partselect.com had drawings of the refrigerator parts that although were a little hard to see were adequate to tell what parts I should order. I ordered the parts, they came in after an acceptable wait. The parts were literally perfect, went right in, and everything is working quite nicely. I am happy with Partselect.com and will probbly go to them first in the future. I actually like the refrigerator a little more now than I did when it was new.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerJames R, from Franklinton LA
Right end cap was broke.
My wife said it was the wrong part before I opened the package. I took out what was in the way and put in what was in the package and everybody is happy. Dat's Dat from da Who Dat Nation!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerRobert C from Bella Vista AR
Pin on right side broken
Removed crisper drawers, removed glass and rails, unscrewed side part and replaced
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver
CustomerVincent from Louisburg PA
The tab that holds the cover to the drawer broke off on my wife
Remove the drawers above the unit as others have indicated and the glass top and then using a 1/4 inch nut driver remove the screws. Now it gets just a bit tricky as the air control knob under the top is a two peice linkage that is best removed as a single unit being carefull not to break off the tab that rests in the middle back of the refrig. Simply swing it out towards the left as you face it and it will become obvious its just a simple tab and once it clears everything comes out in one unit. The logic holding everything together is simply a matter of squeezing a couple of tabs to remove the back portion then a couple more for the inner right side. Re assemble in reverse order and take the opportunity to give everything a real good cleaning. My time of about 45 minutes included a real good cleaning of all shelves etc....happy new year and thanks parts select for getting the part to me in what i think was next day...Awesome service guys
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsNutdriver
CustomerJacob from Kalamazoo MI
Broken hinge pin for the pantry lid
remove the two screws that hold the end cap on and carefully disassemble the linkage rods that control the temp control off and then just reverse the what you did. It wasn't that hard at all. The parts came in two days which was great. The bottom of the refrigerator needed to cleaned so it all worked out.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerRick from Veradale WA
Broken end cap on refer.
really easy it took less than 15 minutes, it took more time to clean out the refer. than to do the repair.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Socket set
Customerwes from caro MI
Broken hinge pin
Remove drawers. Remove 1/4 screws. Remove end cap. The linkage for temp control is very fragile so be very careful. Not a very dificult task at all.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerLinda from Tulsa OK
Tab broke off deli tray and lid wouldn't stay on
All I had to do was remove three screws. Took a few minutes to figure out the arm that controls the air flow into the deli section but that was not difficult, and I replaced the piece and put the screws back in. Done! Beats the heck out of having someone from the company where I bought it come out, then go order the part, then come back out to install it. I figure I saved at least $100. Takes NO great talent.
|