2364946-1-S-GE-WR55X10942-Main Electronic Control Board
2364946-1-S-GE-WR55X10942-Main Electronic Control Board 2364946-2-S-GE-WR55X10942-Main Electronic Control Board http://www.partselect.com/Schematics/GE/GE_Thumb/00125008i08.gif

Main Electronic Control Board

PartSelect Number PS2364946

This board controls the operation of the unit. Note: This part has been updated by the manufacturer. It may differ in appearance but will function the same as the original.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will Not Start.
  • Freezer section too warm.
  • Fridge too warm.
  • Clicking sound.
  • Noisy.
  • Not dispensing water.
  • Fridge too cold.
  • Fridge runs too long.
  • Ice maker not making ice.
  • Ice maker won’t dispense ice.
  • Freezer not defrosting.
  • Freezer too cold.
  • Too warm.
  • Fridge and Freezer are too warm.
  • Compare At

    $212.76
  • You Save

    $35.46
  • Your Price

    $177.30
In Stock
Order within the next 6 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 137 reviews What's this?
1-5 of 137
 

448 of 511 people found this instruction helpful

Parts Used

  • Main Electronic Control Board

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerJohn from Holly Springs, NC

The refrigerator made continous "whooing" sounds that increased and decreased in pitch. Sounded like a ghost. Would keep us up at night. Also noticed that the heater was not heating under the evaporator coils.

After checking the stories, the consensus of opinion was to change the mother board. I had a tremendous help from Tom Paone at quality@applianceeducator.com. He also told me to change the motherboard but to make sure that the coils were totally defrosted before starting up the refrigerator after changing the board.

Took off three nuts around the board at the back of the unit. Removed the input wires and you have to push in the plastic tabs holding the board in. Then just put the new board in place and push till the tabs click. Re-install the wires and put the cover back on.

Really simple task,

It is now a week since doing this and the unit is working perfectly. No soulds and good nights sleep. The ghost has moved on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

270 of 334 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerALBERT from RALEIGH, NC

Our ice damper was warped, which let warm air into the freezer and caused frost to form. Also, our ice and water dispensers stopped working.

Swapping out the ice dispenser damper door was pretty easy- just used a combination of screwdrivers to remove the dispenser assembly, popped the old damper off, put the new damper on. Replacing the control board was only a bit more complicated- unplugged the fridge, removed the control board metal cover (beware the somewhat sharp edges), unhooked all the cables from the board, used needle-nose pliers to pinch each plastic spacer/fastener as to not damage them while removing the old board, mounted the new board where the old board was, and plugged in all the cables (they were all different enough from each other that I didn't have any trouble figuring out where they were supposed to connect). I now have my fridge plugged into a surge protector- hopefully that will protect this new board I've installed. Thanks a bunch,PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

126 of 150 people found this instruction helpful

Parts Used

  • Main Electronic Control Board

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAlejandro from New York, NY

Refrigerator wouldn't cool, constant clicking noise

Unplug refrigerator. First I removed 3 screws to remove cover for Board ASM Main located on back of refrigerator then loosen Board by pressing on each of 4 plastic pins then unscrew ground wire (green) then transfer all plugs from old Board to new Board, put back new board through pins, screw back ground wire then put back cover then plug back refrigerator, took 5 minutes

Help other customers find the most helpful instructions.

Were these instructions helpful?

76 of 83 people found this instruction helpful

Parts Used

  • Main Electronic Control Board

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers

CustomerKen from Gibson City, IL

Ice dispenser quit working and kept making a clicking sound

All you have to do is replace the circuit board which is really easy. Still kinda mad because the fridge is less than 2 years old. If you hear the clicking noise its coming from the circuit board.

Help other customers find the most helpful instructions.

Were these instructions helpful?

83 of 107 people found this instruction helpful

Parts Used

  • Main Electronic Control Board

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJerry from Otisco, IN

Repeatedly stick in defrost, raising temps in fridge and freezer for hours at a time, some times for days. Repair tech was called out twice to look into this problem, but the temps returned to normal both times before he arrived, therefore, he never could diagnose the problem with a certainity as wh

The main board is easy to get to behind the access plate. You will find seven different wire harness plugs, six which are white, that are impossible to remove without breaking the retaining clips which hold them in place....but that's OK.....you are throwing away the old board anyway, so nothing lost. The plugs will snap back into each of their respective terminal locations without a problem. Be sure to treat the four white, plastic pins that hold the board in place delicately....you will not want to mess those little dudes up!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 137