2364946-1-S-GE-WR55X10942-Main Electronic Control Board
2364946-1-S-GE-WR55X10942-Main Electronic Control Board 2364946-2-S-GE-WR55X10942-Main Electronic Control Board http://www.partselect.com/Schematics/GE/GE_Thumb/00125008i08.gif

Main Electronic Control Board

PartSelect Number PS2364946

This board controls the operation of the unit. Note: This part has been updated by the manufacturer. It may differ in appearance but will function the same as the original.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will Not Start.
  • Freezer section too warm.
  • Fridge too warm.
  • Clicking sound.
  • Noisy.
  • Not dispensing water.
  • Fridge too cold.
  • Fridge runs too long.
  • Ice maker not making ice.
  • Ice maker won’t dispense ice.
  • Freezer not defrosting.
  • Freezer too cold.
  • Too warm.
  • Fridge and Freezer are too warm.
  • Compare At

    $212.76
  • You Save

    $35.46
  • Your Price

    $177.30
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 137 reviews What's this?
46-50 of 137
 

2 of 2 people found this instruction helpful

Parts Used

  • Main Electronic Control Board

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerChristopher from Chicago, IL

Temp panel flashed "hrs", refrigerator would not work

Remove back panel to expose the control board. Simply unplug cables from old board and pull the board out, no tools required. Put new board in place and replace the cables. Very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Main Electronic Control Board

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerjohn from Madison, OH

Lost temperature in refrigerator and freezer, making clicking noise

Removed main control board cover on back of refrigerator (3 screws). Unplugged power to refrigerator and removed electrical connections to control board using a screwdriver. Using a screwdriver disconnected (4) plastic self -locking prongs holding the board. Matched new replacement board with old board. Plugged in electrical connections to new board. Snapped main control board onto (4) self- locking prongs. Reinstalled cover (3) screws. Plugged in refrigerator and tested refrigerator operation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Main Electronic Control Board

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerGreg from Damon, TX

Fan was not running to circulate the air; found resistors burned on main board

Removed the board cover from the back, removed old board, installed new board, installed cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Main Electronic Control Board

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerSonya from Sugar Land, TX

No water from dispenser, then constant clicking sound, and frig went warm

After reading this forum and other searches, I assumed replacing the board may solve my problem. Unscrewed the back plate, used pliers to pull out the connectors, squeezed in the sides of the 4 plastic white board holders to release the board, and then replaced old board with the new one and reconnected connectors. (My model was not one of the mentioned models for cutting the 2nd pin of the J1 connector, so I left it in.) Upon plugging my frig back in, it began working perfectly again. So thankful to have found this forum!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Main Electronic Control Board

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJames from Akron, PA

Compressor would not come on. Found the relay on the main board burned up. There was no electrical power to the compressor .

Ordered a new Main circuit Board. It arrived next day. Unplug the fridge to take away electrical power. Unscrewed the panel on the back of the fridge near the top. I then pulled the wire connectors off the circuit board. Gently pull the board off the plastic tabs. Push the new board onto the tabs. Reconnect the wire connectors. Screw the panel back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

46-50 of 137