Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Elizabeth H - August 6, 2020
Verified Purchase
Fast service
Received the correct part as described. Easy to install myself, a 74 year old woman. Fast shipping. Very pleased.
★★★★★
★★★★★
Phyllis N - June 10, 2020
Verified Purchase
Perfect fit
Part arrived promptly. I laid it out on the floor for one night, and the next day, I removed the old, cracked, worn gasket. The new gasket went on very easily and fit perfectly.
★★★★★
★★★★★
Peter B L - October 22, 2018
Verified Purchase
"Not so easy" repair
The gasket had several "kinks" in places -- on both the long and short sides.
Instead of immersing the gasket in hot, then cold tap water, as per the printed
instructions on the shipping container, I discovered a helpful "how-to"
video on YouTube, which suggested the application of warm/hot air from a
hair dryer, to help smooth out the kinks.
After several minutes of careful passes with the hair dryer, the gasket fit snugly
into place.
You might wish to recommend this method to your customers.
★★★★★
★★★★★
Samantha J - March 7, 2018
Verified Purchase
Not easy to work with.
Delivery was quick. The part was very tangled and the instructions on how to untangle were overwhelming that took more time than needed. Uñtimately, the part did not work and a new refrigerator was bought. I tend to stay away hotpoint appliances for my rental units. They break down too easily.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
sweating
i found that the door was to low was the problem shimmed the hinge on the bottom brought the door up so the gasket was ok so isent the new gasket back to you never attempted to change so i dont have any thing to tell you about instalation difficulty carl phillips
carl from zephyrhills, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator
first i removed old gasket then pressed in new one very easy repair
Charles from Baltimore, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
13 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frances Giffin
August 9, 2017
I would like instructions for replacing the gasket door on my refrigerator.
For model number GTS17JBWBRWW
Hi Frances,
Thank you for your inquiry. You do not have to remove the door to install the gasket. When installing your gasket, have a putty knife handy and remove the items from the door so they are not in the way. Use the putty knife to remove the existing gasket from the door and pull firmly around the door, but be careful not to damage the plastic inner liner of the door especially around the corners. Once removed use the putty knife to go around the door to clean out any excess styrofoam that may have come out and clean the liner on the bottom. Make sure the channel is clear. If the new gasket has any kinks in it you may soak in it warm water or place it in the dryer on a low setting to remove them. The new gasket has a rigid strip on the back that goes into the channel. It is important to make sure that the strip is placed fully in the channel and that the vinyl edge lays flat against the outer steel door panel. Drape the gasket over the door and start in one corner. Insert the strip fully into the channel in the the corner section and pull until it is square with the door. Then work it in around the door and make sure it is in nice and tight. It may be a bit difficult around the bottom of the door to insert it where there is no much room to work with. Once complete make sure it is in nice and tight. When you close the door there may be some areas that cause the door to bulge out. If this happens, use some adhesive tape to tape the door shut and this should help even those bulges out, then remove the tape. I hope this helps. Thank you and have a great day!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Loandi
July 21, 2021
What are the part no for door freezer seal and fresh door seal, thanks
For model number GTH17DBC2RWW Serial MV808911
Hi Loandi,
Thank you for your question. The part number listed under your model number for the freezer door gasket is PS2364915. The part number for the refrigerator door gasket is PS2364916. If you would like to place an order for them, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Hi! I just want to make sure that this gasket replacement will fit my model of fridge.
For model number MTS17BBSARWW
Hello Stephanie, thank you for reaching out. The door gasket, part number PS2364916, is compatible with your model. We hope this helps!
Was this helpful?
Thank you for voting!
Stephanie
May 16, 2023
Hi! I just want to make sure that this gasket replacement will fit my model of fridge.
Thanks in advance, Stephanie
For model number MTS17BBSARWW
Hello Stephanie, thank you for contacting us. We have researched the model and found that this door gasket, part number PS2364916, is compatible with your model. If you require assistance to place an order, please contact customer service!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
