Range Surface Element Control Switch Specifications
The surface element control switch turns the surface element on and off and controls how much heat the element produces. (1500W)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
Kenmore, General Electric, Hotpoint, RCA.
Part# WB23M24 replaces these:
AP2023855, 1720, 344555, WB23K5036, WB23M0024
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
burner element not working, assumed element burned out or broken.
4 screws held the cook top down, took top off exposing the burner elements, ordered the one that was bad ( could not believe how easy it was to order from Partselect, and then how quick I received it.) Shocked myself when taking out the element, forgot to disconnect the breaker.
Robert from New Smyrna Beach, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
2 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
one burner would not work
I turned off the breaker to the range. I removed 5 screws holding the control knob carriage. I loosened the 2 screws that hold the control knob to the carriage. I removed each wire 1 at a time from the old control knob and hooked them up to the new one. I replaced all the screws and turned on the breaker.
Joe from Gig Harbor, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
10 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rob
December 2, 2021
I want to replace the 6 in element burner switch. The manual does not say which part I need-the 1500W or the 2350W. The current old switch says 5.4-7 amps. Does it matter which one I order-the 1500w or the 2350W one?. The 8 inch has 8.9-11 OA listed. It is #19 on the manual but does not say if the 6 in burner needs the 1500w or 2350W. If I put the 2350W switch on the 6 in burner, will it cause a fire?
For model number 911.93291792
Hello Rob, Thank you for the question. The smaller Element Switch would require the Smaller amount of Watts. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS236384. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
