Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2363481
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This was the second part of repair. Left side was constantly falling out of the slide. I replaced the same items as above minus the gasket and screw kit. Once done, the right side was sloppy so I orders part for that side plus gasket which slid right in. 1. Removed stops on front end of Upper Dishrack Slide on both sides.2. Removed Upper Dishrack3. Remove Roller and Axle/clip (4 each)4. Push Roller onto Axle on all 4 kits 5. Install all 4 roller kits on Upper Dishrack6. Remove stops from back end of Upper Dishrack Slides.7. Remove both Slides8. Remove 8 each Tub Wheels.9. Using old or new Screws and Washers, install new Tub Wheels.10. Install both Upper Dishrack Slides ensuring that small holes are toward the back.11. Install stops on the back end of Slides.12 Install Upper Dishrackinto slides13. Install front stops on slide14. Pulled out Gasket15. Install replaced Gasket
Help other customers find the most helpful instructions.
Were these instructions helpful?
Just use a hexagonal driver to remove the Upper rack roller, screw the new ones in, place caps on the rail ends, and pop the new wheel on with some pliers! Simple and fun!
replacing 2 wheels was a breeze. did not need the screws afterall.
Replacement was simple.
I clipped the wheels onto the rack. It couldn't be any easier. then i removed the # 25 torx screw which attached the broken slide wheel to the tub and installed the new wheel with the same torx screw.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.