Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ronald R - March 25, 2018
Verified Purchase
Always the part I need.
Exactly the parts to make the repair.
★★★★★
★★★★★
Tai D - February 4, 2018
Verified Purchase
It fit perfectly
Thanks
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
One screw that held the roller would not hold as the hole in the case was stripped. I knew when I removed original as there was material in the screw threads
I used both epoxy on the male threads and then pulled out the case and twisted the flat car body flat kind of a nut. Let it sit for 36 hours and now like new.
Removed the old rollers with with screw driver. Used the original screws and washers, and reinstalled the new rollers. Had been having trouble with top dish rack metal slides popping out of the old rollers. I not that the replacement rollers are slightly larger and have slightly deeper groves for the slides. Have not had the new rolle
... Read morers installed long enough to see if they remedied the problem. Will know in a few weeks time. So far, so good.
Read less
John from NORTH BEND, OR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no issues
replacing 2 wheels was a breeze. did not need the screws afterall.
This was the second part of repair. Left side was constantly falling out of the slide. I replaced the same items as above minus the gasket and screw kit. Once done, the right side was sloppy so I orders part for that side plus gasket which slid right in. 1. Removed stops on front end of Upper Dishrack Slide on both sides.
... Read more/>2. Removed Upper Dishrack 3. Remove Roller and Axle/clip (4 each) 4. Push Roller onto Axle on all 4 kits 5. Install all 4 roller kits on Upper Dishrack 6. Remove stops from back end of Upper Dishrack Slides. 7. Remove both Slides 8. Remove 8 each Tub Wheels. 9. Using old or new Screws and Washers, install new Tub Wheels. 10. Install both Upper Dishrack Slides ensuring that small holes are toward the back. 11. Install stops on the back end of Slides. 12 Install Upper Dishrackinto slides 13. Install front stops on slide 14. Pulled out Gasket 15. Install replaced Gasket
I clipped the wheels onto the rack. It couldn't be any easier. then i removed the # 25 torx screw which attached the broken slide wheel to the tub and installed the new wheel with the same torx screw.
Broken wheels, Caps and Brackets. Couldn't hold dishes or wash right.
Just use a hexagonal driver to remove the Upper rack roller, screw the new ones in, place caps on the rail ends, and pop the new wheel on with some pliers! Simple and fun!
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ernest
September 2, 2019
Screw no longer able to tighten on side roller. Hole has gotten bigger?
For model number pld2850rdc3
Hello Ernest, Thank you for the question. If the screw hole is stripped the roller PartSelect Number: PS11770690 will need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Isaac
January 14, 2020
How does the tub roller get installed onto its position? Does it "snap" on? The center section of the broken/old roller is still in its position.
For model number FPHD2491KF0
Hi Isaac,
Thank you for your question. To remove the roller, use a hexagonal driver to remove the upper rack roller and to screw the new one in, place the caps on the rail ends and pop the new wheel on with some pliers. We hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Lisa
May 25, 2023
Hi, I'm looking for a replacement part for my Frigidaire dishwasher--I need the circular roller/track that the top rack slides in and out on.
For model number PLD2850RDC2
Hello Lisa, thank you for the question. According to our research, the mentioned roller, part number PS11770690, is compatible with your model. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
