Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS236327
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
1) Turn Power off at Circuit Breaker2) Lift Cooktop out of counter top.3) Remove all dials from controls by pulling straight up.4) Remover glass plate which covers burners by removing screws along outer edge.5) Remove the two top screws from the control to be replaced (this holds the infinite control to bracket)6) Remove one wire at a time from the old control and plug on the new one in correct orientation.7) Reverse above order to reassemble.(Note: Not all infinite controls are same PN when ordering, the drawingings are deceiving that they are)
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed counter top stove, released zip ties on flex conduit,removed cover glass, removed switch anchor panel, removed old switch,(noting the color of each wire) replaced switch reassembled.
using the info on this site i guessed it was the switch. It was. this is a Radiant Heat in counter drop on cook top. i was nervous about getting it out of the counter but that was eassy, just sits on top. the One issue was diconnecting the BX electric cable from the elecric box. mine did not have threads and a nut. but a push in fitting with small tabs.. i forced it out by pushing the tabs in with a screw driver.. later found out it was a band that was eassily removable by just prying it open with a screw driver... and later replacing it.. the glas removal was just screws and the switch was insised a cover with four screws.. plugged the new one in (careful to keep the connections the same, and reversed the process.. ready to fix it again if needed!thanks for having the part... probably saved $200! can take less than 30 minutes if you get past the electric connection quicker than i did... that;s it!
1) SHUT OFF POWER2) Removed the cooktop from the counter3)Remove 6 screws holding the cooktop glass frame to the housing4)Removed 4 screws holding the switch retainer to the housing5)Removed 2 screws holding the switch in place6)Moved one wire at a time from the old switch to the new switch7)Reassembled
Removed unit from counter top. Opened to locate wiring diagram. Identified part snd searched on internet. PartSelect.com provided all missing information and had easy to follow instructions...confirming my initial assessment of the problem. Ordering was easy; delivery fast. Job completed.
Turn off breaker removed cooktop from countertop . Removed Phillips screws remove glass top .Remove two screws holding switch & reinstalled
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.