0 of 1 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsPliers, Screw drivers, Socket set
CustomerNorman from Burlington NJ
During the spin cycle machine rocks the house
Replaced all of the springs. I put the shell back on and the problem still exists. I thought $20.00 was worth seeing if this would resolve the issue. I don't want to keep throwing parts at it. I noticed some black suit under the machine. I will be buying a new washer.
60 of 1723 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:More than 2 hours
CustomerBOB from NIAGARA FALLS NY
Tub shacking back and forth
After seeing video it was easy . Took everything apart tub,basket,replaced all springs. Tub wear pads. It took longer because I cleaned eveything,took my time. There was a lot of deposits on tub and outer tub also some rust . Put it all back together all nice and clean . pluged it in put it in spin cycle and the motor just hummed. I than check to see if somethig was stuck no .Pulled motor tested it with out a load and did not work. Motor start winding went. Motor died. 2n one in 7 years. So I fixed that proplem I am a new owner of a Speed Queen washer and dryer .