| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsSocket set
CustomerCharles from Longmont CO
Broken round clasp on end cap, and plastic glass cracked in lid
Most of the time was just removing the food and trays and cleaning up a bit. 3 nuts removed and re attached with a small socket wrench. No wires or anything. The lid then just simply snapped back into place.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Left Side
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerJohn from Montgomery AL
Broken hinge on meat drawer lid
First I removed the drawers under the lid and then the drawers over the lid. I also removed the glass shelving and shelf brackets. Then I removed the three screws holding the endcap and then replaced the endcap with a new one. Then I reassembled the shelves and drawers.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Left Side
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerCharles from Medfield MA
A piece of a component broke off which held on the draw cover.
First I removed the screws from the draw track and screwed on the track to the new part. I then used a socket wrench to remove the component. Once removed, I used the socket wrench to screw in the new component. Finally I placed the cover back on the draw.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Left Side
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsWrench set
CustomerBob from Colorado Springs CO
The tab that the tray door rotates on broke. This is the second time it broke. Very bad design.
I did it quickly since this was the second time it broke. For easier access, remove the glass shelf above the drawer and the two plastic strips that hold it in place. Remove the two screws (yes, there are three screw holes on each side, but there are screws in only the front and center positions; probably to save money on screws) with either a flathead screwdriver or a socket wrench, which works better. There are two tabs on the end cap that slide into slots in the back of the refrigerator. There is also a plastic retainer on the side of the refrigerator in the front that attaches to the end cap. Gently lift up the front of the end cap and pull forward to remove it. Then unscrew and remove the metal slide bars and install them on the new end cap. Then do everything in the reverse order. Fit the two tabs into the slots in the back of the fridge, then position the fitting over the plastic retainer on the side of the fridge, and gently push back and down. Then screw the end cap back in place. Repplace the two strips for the glass shelf and then slide the shelf back into position. The last thing is to refit the tray door onto the tabs on both end caps. Slide it into position onto one end cap tab, then GENTLY push the tab back on the other side and fit it into position on the tray cover.
This sounds more complicated than it is, but there are no instructions with the replacement piece, which in my opinion is bad for customer relations. This is also a really bad design. If you accidentally leave the tray door open when you close the refrigerator door, the refrigerator door will hit the tray door and break one of the tabs.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Left Side
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerJerome from Jacksonville FL
Tab on part which supports the drawer cover was broken.
Removed sliding drawer. Removed the crisper drawers and glass shelf above the sliding drawer. Removed End Cap using nutdriver (3 nuts). Removed metal drawer slide from end cap (2 screws). Installed metal drawer slide on new end cap. Installed end cap. Replaced all parts removed, above. No problems. Everything fit as it should.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers, Socket set
CustomerCarmine from Massapequa Park NY
Broken hinge tab
Removed drawers and glass shelf. Used 1/4 inch socket to remove three screws on broken end cap.
removed two screws from left side draw slide from old part. Installed draw slide on new part. Installed new end cap and tightened screws. re-installed glass shelf and drawers.Easy job and a great price for the part. Thank you
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerVince from San Carlos CA
Left side end cap broke a kept pantry door from opening when drawer was pulled out.
I took all of the shelves and drawers out and took the opportunity to clean the interior to a like new condition. Removed the 4 screws holding the end cap to the side panel and removed end cap. Reversed the operation putting the new part in place and replace all shelves and drawers.
Looks brand new.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerEric from Burnsville MN
Pantry door clips broke
The previous reviews were very helpful. I had confidence that buying the parts would fix the problem of broken clips to the pantry door. It was very easy to install with screw drivers and just remembring how I took it apart. Thanks for the previous reviews!!!!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Pantry End Cap - Left Side
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerPaul F from Rockport MA
Left hand side of pantry drawer broke
Found partselect on internet, ordered the part, received the part in 2 days and removed the old part and installed the new part.
|
1 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerBrian from San Francisco CA
Replacing broken or lost parts
The repair was incredibly easy. More importantly the service and speed of delivery was way beyond expectations. What a great company!
|