2361198-1-M-Frigidaire-154753201-Drain-Hose.jpg
2361198-1-S-Frigidaire-154753201-Drain-Hose.jpg

Drain Hose

PartSelect Number PS2361198

The drain hose connects to the pump located below the lower spray arm. It aids in proper dishwasher drainage. Size: 7.5 feet long

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Leaking water.
  • Not draining.
  • Compare At

    $16.44
  • You Save

    $2.74
  • Your Price

    $13.70
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

11 of 12 people found this instruction helpful

Parts Used

  • Drain Hose

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench set

CustomerJohn from Carthage MO

Drain hose was missing

My friend bought a used dishwasher at a garage sale, the previous owner had thrown away the drain hose because it was "nasty" they said....remember it could have been cleaned. When I went to install it, I removed the old washer, and discovered that the old hose would not fit on the replacement dishwasher. I went to the local repair shop, armed with the model and serial #'s. they searched and searched their books and could not find the hose part number. they said "good luck" when I left...I went home and looked up the model on your web site, ordered the hose, and in 3 days had the dishwasher installed and running in about 30 minutes...thanks for prompt shipping.. I couldn't believe it arrived so soon...Mowerman

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 25 people found this instruction helpful

Parts Used

  • Drain Hose

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerLee from Columbus OH

A hole in the dishwasher dicharge hose.

I had to remove the dishwasher from under the counter, flip it on it's side to gain access to the discharge hose attachment point, removeit, remove the other end of the hose from the sink-side and replace the hose. The sink-end of the hose has a 'collar' that must be cut to fit the fitting on the sink.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2