2360984-3-S-Whirlpool-W10258275-Bi-Metal Fuse
2360984-3-S-Whirlpool-W10258275-Bi-Metal Fuse 2360984-1-S-Whirlpool-W10258275-Bi-Metal Fuse 2360984-2-S-Whirlpool-W10258275-Bi-Metal Fuse http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/KNXFIQQB.gif

Bi-Metal Fuse

PartSelect Number PS2360984

This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Also known as Thermal Fuse.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Not draining.
  • Compare At

    $22.14
  • You Save

    $3.69
  • Your Price

    $18.45
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 14 reviews What's this?
1-5 of 14
 

103 of 122 people found this instruction helpful

Parts Used

  • Bi-Metal Fuse

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDouglas from Dallas, GA

Would not turn on

I did a search on the website and read the instructions for trouble shooting. I took the inside door off by taking the screws out. I pulled the part and tested it and found it did not in fact have no ampage. I then ordered the part on line. It came in two days, I plugged it in, put the door back together and the total time was about 15-20 minutes. Easy, simple, great instructions and the entire thing only costed me the part itself. It's working great now! And I've never worked on appliances before.

Help other customers find the most helpful instructions.

Were these instructions helpful?

38 of 41 people found this instruction helpful

Parts Used

  • Bi-Metal Fuse

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerpauline from gloucester, VA

Dishwasher cut off during drying cycle

After replacing the thermal fuse 5 times i noticed the new packaging came with a terminal block on then fuse harness. PLEASE USE THIS. It is a must, it supposedly is acting as some type of heat sink or something for added protection. Used the unit on all cycles now and works great. Just follow fuse instructions precisely. Hope it helps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

28 of 34 people found this instruction helpful

Parts Used

  • Bi-Metal Fuse

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerTracy from Westerville, OH

Power to dish washer, but no power to any led's or power buttons.

Very easy to install the new B Metal Fuse. Removed torx head screws holding the outer door panel on the dish washer. Removed the fuse and two wires connected to the fuse. Inserted the new fuse in the holder and plugged the two wire connectors back
on. Installed the outer door panel back on, turned the breaker back and the machine powered back up. Very easy install and saved a service call. Total repair cost $24

Help other customers find the most helpful instructions.

Were these instructions helpful?

26 of 35 people found this instruction helpful

Parts Used

  • Bi-Metal Fuse

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJessica from Clintwood, VA

Lights flashing on wash options, cancel would work but nothing else

open dishwasher door, use torx socket and ratchet to remove 6 screws. Pull down wash options face, find the bi-metal fuse. Used the directions in the package to replace. popped old fuse out of electrical board, Cut 2 wires, stripped said wires, attached stripped wires in housing on new part, tightened the 2 screws where new wires attach, popped new fuse in electrical board. Reattached face. Very simple and easy to do. Did not fix the problem. Had to get the electrical board that the bi-metal fuse is snapped into. Very easy for someone that has worked on vehicles or electrical things before. If no experience, then I would say it is still easy as long as you follow the directions taht comes with the part. It has pictures as well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 19 people found this instruction helpful

Parts Used

  • Bi-Metal Fuse

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerMike from Ridgecrest, CA

Wirlpool dishwasher not getting power to panel. Outlet checked out fine

First I unplugged the dishwasher.Then I removed 6 Torx screws, popped off cover, cut wires to old fuse, stripped wire, placed wires in new part, tightened screws, reassembled in reverse order, plugged unit back in and tested. WOO HOO!

I saved over $150.00 by doing it myself instead of having a repairman come out! That's 4 free fishing trips!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 14