Detergent and Rinse Aid Dispenser WPW10224428

Hi Ralph, Thank you for your inquiry. There are no videos for this particular part at the moment. However, it sounds like you will have to replace your dispenser as it is either and internal electrical problem in your part or the part is physically broken. Either way, you will have to replace the part. Good luck with your repair.

Hello Tony, Thanks for your question. The seal is not available as a separate part and you would require a new detergent dispenser to obtain that part. I hope this helps.

Hi Julia, Thank you for your question. The problem will most likely be with either your detergent dispenser or your electronic control board. More than likely your dispenser if all of the other functions in your dishwasher are working perfectly fine. I hope that helps. Good luck with your repair.

Hi Greg, Thank you for your question. The detergent dispenser is designed to release detergent into the dishwasher tub during the wash cycles and will typically have two compartments, an unsealed compartment for prewash and a sealed compartment for the main wash cycle. Verify that the dispenser is not simply clogged with caked on detergent and give it a good cleaning if necessary. Also check to make sure that the cover for the dispenser will open easily and is not damaged or broken. Check the release mechanism for worn or defective parts and replace if necessary. The rinse aid dispenser is designed to release rinse aid into the tub during the rinse cycle. Verify that the dispenser is full and is not clogged with detergent and verify that the cap is adjusted properly. The dispensers may be operated by either a mechanical devise or by a bi-metal release or wax motor devise. Also, The rinse aid cap could be the reason why your dishwasher is not releasing rinse aid. The rinse aid dispensing cap is located on the inner door panel of your dishwasher. The rinse aid cap could be loose and may just need to be refitted, but could also be warped or damaged from the heat of the water in the dishwasher. Remove the cap from the door and inspect it for signs of melting or warping and replace if need be. I hope this helps. Thank you and have a great day!

Hello Rick, thank you for inquiring. This Detergent and Rinse Aid Dispenser part PS11750654 is the replacement for your model.

Hello Baron, thank you for inquiring. For your model the Rinse Aid Cap is part PS11746426.

Good Day Carmen. Thank you for your question in regards to your unit (Model Number WDF510PAYS2). Based on our research the part number for the part that is compatible with your unit is PS11750654. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.

Hi Jonathan. Sadly the gasket is not sold separately. Thank you for your question and good luck with your repair.

Hello Maria, thank you for contacting us. Based on our research, there is a lock that is used to hold the door. If that lock is broken or not holding the door, you may need to replace the detergent and rinse aid dispenser, part number PS11750654. We are providing you with a relevant video that will help you in replacing the dispenser. We hope this solves your problem!

Hi Terri, Thank you for your question. The detergent dispenser is designed to release detergent into the dishwasher tub during the wash cycles and will typically have two compartments, an unsealed compartment for prewash and a sealed compartment for the main wash cycle. Verify that the dispenser is not simply clogged with caked on detergent and give it a good cleaning if necessary. Also check to make sure that the cover for the dispenser will open easily and is not damaged or broken. Check the release mechanism for worn or defective parts and replace if necessary. The rinse aid dispenser is designed to release rinse aid into the tub during the rinse cycle. Verify that the dispenser is full and is not clogged with detergent and verify that the cap is adjusted properly. The dispensers may be operated by either a mechanical devise or by a bi-metal release or wax motor devise. I hope this helps. Thank you and have a great day!