http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/1QODVZUR.gif
See part 19 in the diagram

Electronic Control Board

PartSelect Number PS2360723

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Fridge too warm.
  • Will Not Start.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 5 reviews What's this?
1-5 of 5
 

53 of 66 people found this instruction helpful

Parts Used

  • Electronic Control Board

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsNutdriver, Screw drivers

CustomerJarrett Garcia from Palm Desert CA

Display lights flashed briefly and beeped

Remove many screws to access top electronics boxes. Remove 2 screws to open main control board box. Disconnect the 6 coded plugs. Release tabs holding board on box and transfer to new board. Install jumper on center of board in same location (not supplied with new one). Fit new board to box. Connect all plugs. Re-mount box and all covers and screws. Plug in and turn on power switch. Note:This repair was done after a long diagnostic process and downloading of the factory technical manual. Not recommended for the novice DIYer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

40 of 50 people found this instruction helpful

Parts Used

  • Electronic Control Board

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerTracey from BRIDGEWATER NJ

Beeping noise compressor cutting in and out intermittently

Hello,

My repair went well, wifey was not really sure about me to fixing my own refrigerator at first. however, it was a simple matter for me since i am the owner of my own Refrigeration and Air Conditioning company.

I diagnose, isolated and replaced the problem.

which was really the compressor relay however since the relay was built into the board and i could not relay is built into the board i had to replace the entire board.

Now please note that this symptom is also common to other part so one must first be certain that it is the control board
Thank you
Ricardo

Help other customers find the most helpful instructions.

Were these instructions helpful?

29 of 35 people found this instruction helpful

Parts Used

  • Electronic Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers

CustomerWillliam from Maitland FL

Compressor running intermittently, refrigerator temperature getting higher, display panel working intermittently

Getting to the board was the hardest part; once the cover was removed and the housing for the control board removed it was simply unplugging 6 connectors and plugging in the new board.

Help other customers find the most helpful instructions.

Were these instructions helpful?

24 of 32 people found this instruction helpful

Parts Used

  • Electronic Control Board

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerPaul from Sugar Land TX

Compressor comes on and off intermittently , temperature rising in both freezer and cooler. Display panel flickers with beeping sound.

It was really easy, it took me about 20 minutes to complete the repair. One thing worth noting though, malfunctions of this particular part can cause the inverter box , this is the electronic box that controls the compressor, to function erratically and finally burned out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

22 of 30 people found this instruction helpful

Parts Used

  • Electronic Control Board

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers, Wrench set

CustomerLudovino from Miami FL

Freezer would get frost and would not cool

I am not a Do-It-Yourselfer, I am a surgeon, but the technician told me the part number I needed and it took him 20 minutes to install after I got it. It was a smooth repair experience!

Ludovino Sánchez

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 5