http://www.partselect.com/Schematics/Frigidaire/LSI824AT.gif
See part 100 in the diagram
http://www.partselect.com/Schematics/Frigidaire/LSI824AT.gif

Crisper Cover Support - Front

PartSelect Number PS2358880

This part can be used for the front support. Sold individually and mounts to the inside cabinet wall.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Compare At

    $3.58
  • You Save

    $.60
  • Your Price

    $2.98
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 25 reviews What's this?
1-5 of 25
 

222 of 232 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Peter from Amherst, NY

Support studs were broken

Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.

Help other customers find the most helpful instructions.

Were these instructions helpful?

189 of 351 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Fred from Plano, TX

Had broken sheves on the doors and the crisper drawers weren't suported

The only difficult aspect of the job was getting the old shelf support stud removed from the refrigerator wall - the support was broken off too short to allow vise grips to hold it. I had to use two screwdrivers to get under and then pop out the stud to the point I could get the pliers to hold. Everything eles pretty much just "fell together" very easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?

29 of 37 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Shelia from Odessa, TX

No big deal

it was a no brainer install

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Victor from Wilton, CA

2 broken shelving supports

The shelving brackets are install much like a blind rivet. I simply used a punch and gently pushed in the plastic center pin / mandrel. I then used a butter knife as a wedge to pull out the shelving supports enough to grab them with a pair of pliers. Simple to do!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Ray from Millbrook, AL

Crisper support was broke

Parts Supply had a YouTube video to show it was done. This is one of the best sites to get parts there is. Easy to use, tells you how to install them easily. Thanks Parts Supply, I'll be back whenever I need a appliance part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 25