This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Refrigerator Crisper Cover Support - Front
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Electrolux.
Part# 241993101 replaces these:
AP4427109, 1513082, 240423701, 7241993101
Customer Reviews
Average Rating:
★★★★★
★★★★★
78 Reviews
4.8
Filter By Rating:
5 Stars
69
4 Stars
5
3 Stars
1
2 Stars
2
1 Star
1
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charlotte L - July 29, 2023
Verified Purchase
Sooo easy to install
Just what I needed to fix my problem. Everything works like new. THANKS
★★★★★
★★★★★
Marie L - March 15, 2023
Verified Purchase
The repair was soooo easy.
I needed a replacement cover support for my refrigerator crisper. The order came with a link with a short video detailing step by step how to do it. It was so easy. Anyone can do it.
★★★★★
★★★★★
Edwin H - January 11, 2023
Verified Purchase
Easy peezie
Excellent replacement
★★★★★
★★★★★
PETER C - August 19, 2022
Verified Purchase
Quick fix and the crisper drawers are useful again.
The video on how to push out the pin to remove the drawer support was a big help!
★★★★★
★★★★★
Richard M - June 10, 2022
Verified Purchase
Easy and quick
Fast delivery. Easy access and ordering of parts.
★★★★★
★★★★★
Adrian G - May 31, 2022
Verified Purchase
Easy fix and was just what I needed
The parts were excellent and exactly what were needed. Glad I ordered extra because I missed it initially..
★★★★★
★★★★★
Ellen B - May 23, 2022
Verified Purchase
Great Service
Perfect part. Lightning fast shipping! The perfect on-line shopping experience!!!
★★★★★
★★★★★
Claire F - February 24, 2022
Verified Purchase
Easy DIY Repair
Parts arrived in great shape and were super easy to replace the old ones!
★★★★★
★★★★★
Richard C - February 23, 2022
Verified Purchase
Quick and painless repair
I looked up the part on the site and ordered it. The new shelf support in the mail within a few days. I watched a video to see how to replace the part and had it fixed in about five minutes.
★★★★★
★★★★★
Vera W - December 6, 2021
Verified Purchase
Easy repair
Worked as expected.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 35 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace crisp cover support was the most difficult of the entire project and that wasn't hard
With screw driver popped old support out and replaced with new then put crisper drawer with glass cover in. Quite easy
Basically I just needed a crisper drawer cover w/o glass and the crisper support. I used a butter knife to remove old support clips and new ones snapped right in. Everything else was common sense
Removed broken parts and installed new ones. Only had a little problem getting supports out. I think they had sticky stuff from spills in the refrigerator that made it more difficult.
door bins slid right into place. Support was easy ,knocked out pin with screwdriver and hammer. Used vise grips to remove guide pins as bottom of old support was broken. Removed support by hand. Placed replacement over holes and gently tapped locking pin into place with hammer and screwdriver. Video on website was accurate and helpful.
I followed the video and everything went smoothly. After pushing the pin in I pulled out the broken pin with needle nose pliers-very easy just like on the video. It took more time finding all the simple tools than the job itself-well almost!
Broken plastic guides on both crisper drawer covers. Upper crisper pan broken. Broken supports.
Remove both crisper pans and covers. Discard old frames and re-use glasses. Use two screw drivers to gently pry out broken supports. Top broken off smooth on one support. Unable to grasp with pliers to pull out. I drilled a small hole in the center of the large expansion pin. I screwed in a small sheet metal screw. Used side cutter pliers
... Read more to grasp screw and gently rock back and forth to remove center of large pin. Plucked out broken pieces with needle nosed pliers. Gently tap in expansion pins to install new supports. The rest is simple re-assembly using new parts. "Nothing to it but to do it."
Nothing exciting - just replaced the defective drawer covers with the new parts. The guides are poorly designed. the bottom guides on both covers failed.
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vince
July 20, 2017
When I try to pull pry the support off, the inner liner of the fridge is coming out with it. How do I take it out without breaking anything?
Hello Vince, in center of the supper there is a small circle, you will have to puncture this to remove the support without damaging your fridge. First, we recommend pushing it in, using a putty knife to pry the support off, and then using a pair of pliers to remove the pin. If you cannot get the pin out you can use a flat blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator. I hope this helps!
26 people found this helpful.
Was this helpful?
Thank you for voting!
Kesha
July 20, 2017
Just realized I need front AND back supports… can I order this part for both the front and the back of my fridge??
Hi Kesha, this crisper cover support 241993001 can be used for both the front and the rear of your fridge, as it was redesigned by the manufacturer. Best of luck with this repair.
18 people found this helpful.
Was this helpful?
Thank you for voting!
Rich
November 14, 2018
You answered another question saying that part# 241993101 is now used for the front and back support. The back support was just a pin so how does it work now?
For model number FFHS2611LBNA
Hello Rich, Thank you for the question. This would depend on the model number of the appliance. On the previous customers model it was the front and rear. For the model number you have provided, you need PartSelect Number PS2358879. There is a video listed under the part informatio0n on how to install. Hope this helps, good luck with this repair!
So my crisper drawers keep falling off and I assumed it was because my supports are broken. But I looked at them closely and they seem to be fine and the right make/model. Is my fridge expanding or my drawers shrinking? Is that a thing? How do I fix this
Hi Alice, sometimes the lines in a refrigerator can warp. What you can do is make sure your drawers are not damaged and that your supports are in good condition on the unit. Please let us know if you have any further questions.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Joseph
March 27, 2019
My bridge element does not work anymore, I used a griddle and after the only thing that worked was the front and rear elements
For model number GLEF396AQC
Hello Joseph, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS820333. Thank you for your inquiry, good luck with this repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Winston
June 3, 2019
The coil is iced up
For model number Glhs238zds
Hello Winston, thank you for inquiring. The cause of this may be due to either a faulty Defrost Thermostat part PS469522, the Adaptive Defrost Control Board part PS2582247, or the Evaporator Fan Motor part PS3419839. We hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Gail
November 15, 2018
Will the part still be able to install if there is a small break on the installation hole?
For model number ffhs2622mba
Hello Gail, thank you for your question. Yes, the part should still work. If you find its loose, you may want to glue it to the inside of the fridge. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Roger
March 3, 2018
My water filter will not release so that I can change filters. I had removed the old one to check the date and replaced it back into the fixture. Now when I push the release button, nothing happens. Can you help?
For model number GLRS234ZAB2
Hello Roger,
Thanks for your question. You may need a new water filter base to fix this issue, part number PS976499.
I hope this helps.
DOES THIS CRISPER COVER SUPPORT WORK FOR THIS MODE
IF YES ITS THE FRONT ONE
For model number FRS23KF6EM8
Hello Vivian, thank you for your question. Based on your model number, we find the correct part to be PartSelect Number PS2358880. We hope to hear from you soon.
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
October 4, 2022
Something happened electrically that won't let my ice dispenser work. It makes ice but won't dispense. The same is happening to my ice water, it won't come out when lever is pushed. The main wires coming up to feed these 2 is dead. I want to get this working again even if I have to run 2 more wires manually from where the wires are hot. Is this possible?
For model number FRS6HR35KW1
Hi John,
Thank you for your question. There is a wire harness with light listed for the dispenser. The part number listed under your model number for the wire harness is PS12746212. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
