http://www.partselect.com/Schematics/Frigidaire/Frigidaire_Thumb/LSI824AT.gif
See part 100 in the diagram

Crisper Cover Support - Front and Rear

PartSelect Number PS2358880

This part can be used for either the front or rear support. Sold individually and mounts to the inside cabinet wall.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

  • Compare At

    $3.29
  • You Save

    $.55
  • Your Price

    $2.74
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 25 reviews What's this?
1-15 of 25
 

145 of 150 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerPeter from Amherst NY

Support studs were broken

Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.

Help other customers find the most helpful instructions.

Were these instructions helpful?

172 of 326 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerFred from Plano TX

Had broken sheves on the doors and the crisper drawers weren't suported

The only difficult aspect of the job was getting the old shelf support stud removed from the refrigerator wall - the support was broken off too short to allow vise grips to hold it. I had to use two screwdrivers to get under and then pop out the stud to the point I could get the pliers to hold. Everything eles pretty much just "fell together" very easily.

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 19 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerShelia from Odessa TX

No big deal

it was a no brainer install

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerVictor from Wilton CA

2 broken shelving supports

The shelving brackets are install much like a blind rivet. I simply used a punch and gently pushed in the plastic center pin / mandrel. I then used a butter knife as a wedge to pull out the shelving supports enough to grab them with a pair of pliers. Simple to do!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

  • Crisper Cover Support - Front and Rear

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRichard from West Seneca NY

Broken shelf support

I broke off remainder of clip, and used phillip
screwdriver and pushed pin into wall. I lined up new support and pushed in peg to secure

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 9 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerDarin from Nicholasville KY

Guides damaged, crisper pan cracked

1.Got on line to Partselect ordered the parts we needed .they arrived Quickly and in good condition 2.Except the tray was sent in error delaying the repair. 3.contacted Partselect costumer services for assistance 4.Followed their direction and reorder the correct one hoping the correct one would arrive .it did the next day .5.On to repair, removed broken stud with panel stud puller with the aide of a putty knife to spread the pressure of tool stud came out 6.reinserted new stud 7.replaced the new upper crisper drawer cover glass not included . 8.Upper Crisper pan to complete the repair. 9.all in all successful with the help of Partselect superior parts and helpful guides.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customeralfredo from miami lakes FL

Glide replasement for frige and range oven

snap out the damage one replace whith the new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Crisper Cover Support - Front and Rear

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerRANDY from NORTH CHARLESTON SC

Support stude for both vegetable crispers broken off

Support studs have an expansion fitting - center post has to be pushed through to allow expansion joint to collapse for removal. After installation, this post can be pushed in or pulled out to secure the stud and be the proper length to hold the bins.

None of this was obvious - an online tip from another member was invaluable.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerStephen from Crawfordsville IN

Broken shelf supports

First removed 3 bottom screws on ice dispencer, unpluged the wires then pulled unit out of door. Then removed 2 flat pivot brackets, changed the actuators, then reversed the assembly. On the support studs, were pryed out of side walls and the new one's inserted, used a very small hammer to drive the pin's on the studs.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Crisper Cover Support - Front and Rear

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerKristina from Woodbridge VA

Broken shelf support stud

I used pliers to get the remaining shelf support studs out, then the new ones just snapped right in place. Very easy repair!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Crisper Cover Support - Front and Rear
  • Door Shelf

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerRay from Millbrook AL

Crisper support was broke

Parts Supply had a YouTube video to show it was done. This is one of the best sites to get parts there is. Easy to use, tells you how to install them easily. Thanks Parts Supply, I'll be back whenever I need a appliance part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Crisper Cover Support - Front and Rear

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

Customermark from jonesboro GA

Broken tabs

The tabs were broken by kids it took 10 minutes to repair on all 4 tabs you have to remove the push pins completed to get the new tabs to fit right

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyVery Difficult

Time to do repair:More than 2 hours

ToolsPliers, Screw drivers, Wrench(Adjustable)

CustomerKamilah from Cordova TN

Cripser cover support is impossible to install.

The support is still not installed. I cannot remove the old support from the wall of the refrigerator. I have used all kinds of tools.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Crisper Cover Support - Front and Rear

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerScott from Jensen Beach FL

Water dispenser dripping causing corrosion below tray

Replacement of the water valve repair was a snap. Only the main supply line needed to use a nut to secure the water supply. All other lines were simply cut below the pointed end of the plastic tubing line, nylon nut discarded and simply pushed in to seat with a O-ring fitting. Took no more than 10 minutes to install the new valve and test for leaks after turning water back on. This was the easiest appliance repair I have done in > 5 years, 100% success first time,

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Crisper Cover Support - Front and Rear

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerSamuel from Camden SC

Broken shelf support stud

Use pliers to remove the broken support. Clear the remaining insert pieces with screwdriver/pliers and insert the replacement part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 25