| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWilliam F. from Landisville PA
One track on the crisper was broken, as was a support on another shelf.
Parts came in about 2 days, reasonably priced. I removed the broken pieces, and installed the new parts. Both pieces were installed in less than 15 minutes, no tools required. The whole experience was good from start to finish, and my wife thinks I'm a genius.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRoger from Windfall IN
There were three broken supports
removed the old parts with a philips screwdriver then repalced those parts with the new parts and knocked the keeper inwith the small hammer
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers, Screw drivers
CustomerANGEL from ORANGE CITY FL
Shelf support broke
I pull out the broken part by push the center pin thru and then rerome all the parts. I then positioned the new part in place and push in the center pin to lock. quick and easy.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJerome from Hendersonville NC
Broken shelf support
ordered the part, watched the video....it was a snap
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerPHYLLIS from HOMER GLEN IL
Replace burner pans
just changed the pans---replaced the support in the refrigerator with no problem, then replaced the cover. I put your web page in my favorites. Could not be happier with merchandise and how quickly I received my order
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBambie from Canoga Park CA
The crisper support broke
I used the paint spatula to pry out the old part and then put in the new part and pushed in the holder with my fingers. Super easy.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
Customerkelly from Comfort TX
Shelf supports broke
just slid them in and gently taped the pegs in
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerDerek from Graham WA
Plastic shelf support broke
Took out the support and put back in the new one.
|
1 of 7 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerTimothy C. from Aberdeen MD
Crisper drawer supports broke
The parts supplied were made to fit. The hardest part was getting the original broken tabs out of the internal walls of the fridge with out damaging the internal insulation. I punched the center locking pin through completely, dug out the broken tabs and then reached into the hole with a dental pick and pulled out the center pin. The new parts fit perfectly and with a plastic mallet, tapped the new locking pin into place.
|