2358879-1-S-Frigidaire-241993001-Crisper Support - Rear
2358879-1-S-Frigidaire-241993001-Crisper Support - Rear 2358879-2-S-Frigidaire-241993001-Crisper Support - Rear

Crisper Support - Rear

PartSelect Number PS2358879

This part mounts on the inside of the wall. Sold individually.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Compare At

    $4.61
  • You Save

    $.77
  • Your Price

    $3.84
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 26 reviews What's this?
1-15 of 26
 

7 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerAmy from Dunedin FL

Parts were broken, needed replaced...

I followed a gentleman's directions on your website, very useful I might add. It helped me replace all the broken parts with ease. I am a 33 year old mom of two. Anyone could do these repairs that I did. Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Crisper Support - Rear

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDavid from Coppell TX

My frigidaire drawer broke

My Frigidaire Drawer broke... I ordered the parts and installed it within 5 min. It took more time to remove the food and drawer then it did to install the pegs.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Crisper Support - Rear

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerRuth from Lake Forest CA

Crisper bin track support

The part arrived in about 2 days! The right side support that is attached to the inside wall of the refridgerator, that holds the crisper guide, broke apart and would not support the crisper. We took everything off of that shelf and took out the crisper and the glass that is on the shelf. We then carefully pried the support from the interior wall (it was a slow tedious move to be sure we did not damage the wall of the fridge). We made sure all of the pieces were out and snapped the new one into place. For some reason the old one did not want to come out. It broke into many pieces and we carefully pulled all of the little pieces out of the notches

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Crisper Support - Rear

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench set

CustomerGEORGE from ASHEVILLE NC

Crisper supports broken

Removed supports with pliers and used center punch to push broken plugs out of hole and inserted the new supports.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerSandra from Litchfield NH

Broken crisper drawer supports, cracked door shelf bins, broken freezer door handle.

My freezer door handle has been broken for probably 4 or 5 years - ex husband was not a handy man whatsoever. Never even thought to search for a replacement. Two door shelf bins were cracked and I had to be careful with how much weight I put in them. Then the crisper drawer support pegs broke. I couldn't do without that, so I finally searched on line for replacement parts. This web site was so easy to use - detailed diagram left me with no doubt that I was ordering the correct parts. My order came within 4 or 5 days of my placing it! The parts were very simple to replace. I can't believe how long I waited. But $100 in parts has made me very happy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerPaul from Mobile AL

Plastic crisper pan cover and supports broken

This is the second time I've had to replace the crisper cover, so I had that step mastered. As before, I took the glass from broken crisper cover and dropped it into new cover in seconds. Had to use a screwdriver to pry old crisper supports from the walls of the fridge. This was the only hassle. Popped new supports in, replaced crisper covers, and slid crisper drawers back into place. From now on, I'll have to be more careful about how much weight I put into crispers.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Crisper Support - Rear

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerNeil from Lilburn GA

Crisper cover support was partly sheared

I followed the excellent directions in the video linked to the email from PartSelect. The installation was quick and easy. I rated the whole operation "a bit difficult" because, if I had seen the video before I removed the old part, I would have known that you tap the support's center rod gently INTO the wall instead of wrestling it violently OFF the wall.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJeneen from CHARLOTTE NC

Broken support

Installed new support

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyDifficult

Time to do repair:30 - 60 mins

ToolsPliers

CustomerJOSE from Miami FL

Crisper support pins were quite tricky to secure

The old pins have to be completely dislodged (preferably with an awl) before placing the new crisper support. The new pin of the support should be driven easily into the hole on the refrigerator´s wall with a conventional hammer (carpenter type). If you find resistance while hammering on the pin, do not continue. This probably means that the old pin is still inside the hole and does not allow the new pin to go in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Crisper Support - Rear

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerFredey from Andrews TX

Crisper supports were broken

Drove pins all the way thru supports & then pryed support off. Tapped new supports in place. Watch the vidio on installing new supports. I probably wouldn't have been able to get the supports off without the trick I learned to just knock them on thru. Took all of 5 minutes to replace 4 supports.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Crisper Support - Rear

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDale from Fort Wayne IN

Broken crisper supports

The video was very helpfull. They were fixing the same refrigerator that I have. I punched in the set pin on the old part. Removed the old part by prying it out with a putty knife. Inserted the new part and drove in the set pin. I was glad that PartSelect had my parts. The repair shop in Fort Wayne Indiana did not even show this repair part on their computer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Crisper Support - Rear

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerwilliam from bellmawr NJ

Broken support

had to remove broken by pushing 1pin then remove.
put new one in reset pin done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerElaine from Canon City CO

Pegs on shelf support and door bin were broken during a relocation

The door bin was an easy fix, just slip the edges into the raised supports of the door.
However, replacing the pegs which support the crisper bins, was a lot more difficult. Removing the old peg was not as easy as one might think. Because the pegs were broken, there was nothing to grab hold of. Having the replacement peg was helpful in determining how the old one was attached to the refrigerator wall. I needed to get a small blade screwdriver, and also a thin pocketknife blade, behind the base of the peg and wiggle them enough to get hold of it with the tip of needle-nosed pliers. The peg broke off in several pieces. Some I could remove by snapping them off and others had to be pushed in behind the refrigerator wall because there was no way to get hold of then. Once that was done, the new peg popped easily into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Crisper Support - Rear

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerjohn from mount airy GA

Bracket that holds crisper shelf broke

Have not really done the repair yet( frig is still to full of Thanksgiving leftovers) but I am sure that with the video that was provided by this site the job will be very simple. Many thanks to the person who put the video together.
John Donnelly

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Crisper Support - Rear

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerSTEVEN from NEWPORT BEACH CA

Crisper supports (2) broke and shelf had no support.

I read other comments and most suggested the fix is less than five minutes and a couple tricks (push the remaining piece into the frig if you can't pull out with pliers)and I did exactly that. Parts came in 2 days, repair took 5 minutes - it took longer to open the package. My wife thinks I'm a star!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 26