2 of 9 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers
CustomerDavid from Fort Worth, TX
Missing back and sides to new stove
There were two slightly complicated aspects to the repair. The first was with the new back (top cover to wall) the sides would not install. I had to cut a slot in the side panel so it would slide in. The second trick was the support on the side would not fit cleanly through the supplied hole. Once again I used my Dremel to enlarge the hole and it all fit together. None of my changes can be seen so overall I was happy with the final look.