2357970-1-S-Whirlpool-5787D104-60-Orifice and Tube Assembly - Right Side
2357970-1-S-Whirlpool-5787D104-60-Orifice and Tube Assembly - Right Side 2357970-2-S-Whirlpool-5787D104-60-Orifice and Tube Assembly - Right Side 2357970-3-S-Whirlpool-5787D104-60-Orifice and Tube Assembly - Right Side http://www.partselect.com/Schematics/Maytag/57824.gif

Orifice and Tube Assembly - Right Side

PartSelect Number PS2357970

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Gas smell.
  • Compare At

    $52.96
  • You Save

    $8.83
  • Your Price

    $44.13
In Stock
Order within the next 9 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Orifice and Tube Assembly - Left Side

Part Number 2357971

Order within the next 9 hrs and your part ships today!
$39.68
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 4 reviews What's this?
1-4 of 4
 

22 of 26 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Johana from Philadelphia, PA

2 front burner (right and left) doesn't work

That's easy...unscrew the 4 top burner and open it slowly.
Open the tube's nut...i used the wrench.
Then install the new one.
And put it back together like before the first thing, and we got 2 burner worked.
It takes about 20-30 minutes.
Thanks Partselect.com
Now i know where i have to go if i need something special part for my household.

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 21 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Customer: Richard from Salinas, CA

Broken front burner gas lines

The biggest challenge with the repair was propping up stove top. This range doesn't have a prop arm, and the burner assemblies are attached by screws to stovetop. DIY'ers take note: take a minute to learn how your stove is designed before attempting to clean it by lifting the stovetop too high and breaking the front burner gas lines like I did on mine. Fortunately the new burner assemblies fit perfectly with no gas leaks, and the stove is working good as new. Thanks PartSelect!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench set
Customer: ALICE from Crete, IL

Broke gas supply lines to burners atpoint closes to controll knob. I did not remove 2 screws holding lines to stove top and when I lifted top they shear off. Rick alice's husban thank you

. First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...)

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Customer: George from Big Rapids, MI

Lifted stove top broke gas lines

Replaced gas line and orifice assembly. Had to swap orifice for the LP Gas orifice I purchased with the stove. Install and adjust took about 45 minutes to complete including clean up and test.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4