2 of 3 people found this instruction helpful
- Control Panel With Touch Pad - White
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerTim from Saint Paul MN
Buttons on the control panel started dying. Only 1,4, and 7 still worked., and about half of the other controls.
Remove the screws from the trim pieces. Remove the plate under the control panel by unscrewing the six or so screws holding it in place.
Pull the oven out a little and prop it up on blocks.
Remove the nuts fastening the control panel with a 1/4" nut driver. Remove the nuts securing the circuit board to the panel. Remove the connector ribbons from the circuit board.
Reverse the process to install the new panel.