6 of 8 people found this instruction helpful
- Electronic Clock Oven Control - Black
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Mike from Fairfax Station, VA
Oven would shut-off, got an f1 code
I Goggled the default code of F1, my search stated that the temperature sensor might be bad. I bought one locally and installed it. I still received an F1 code, so I purchased this part called a "Clock, w/overlay" which is actually the control panel. It installed pretty easily, I took one wire off of the old control panel at a time and plugged them into the new panel, then put the rear panel back on. The oven heats normally now with no default codes.