2356994-1-S-Whirlpool-3412D025-09-Burner Head Cap with Spark Electrode
2356994-1-S-Whirlpool-3412D025-09-Burner Head Cap with Spark Electrode 2356994-2-S-Whirlpool-3412D025-09-Burner Head Cap with Spark Electrode http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/50074.gif

Burner Head Cap with Spark Electrode

PartSelect Number PS2356994

This part distributes flame evenly to your cookware.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $97.26
  • You Save

    $16.21
  • Your Price

    $81.05
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 14 reviews What's this?
1-5 of 14
 

24 of 36 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

Customerpaul from mc neal, AZ

Porcelan on igniter broken (2)

remove 2 screws that hold element in place, remove element, replace with new element, and replace screws , replaced burner assy on other

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 9 people found this instruction helpful

Parts Used

  • Burner Head Cap with Spark Electrode

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

Customerj from bridgewater, NJ

Sealed burner caps were rusted within and gas leak through the bottom of the caps

Just used a car oil filter band type wrench and rotated the sealed burner cap a 1/4 turn. cleaned up the rust and dirty. Replaced it with the new cap and tightened it with a 1/4 turn by hand. Instruction can be found on Maytag gas installation manual. The burners are working well and just like a new range.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

  • Burner Head Cap with Spark Electrode

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSteven from Warwick, MA

Both burner heads would not ignite

Unplugged the burner heads from the wires, and simply put the wires on the new burner heads and put back onto the stove,. Simple as pie. Very happy that i found parts select online, easy to find the part though your pictures and easy to order.
Loved being able to do this myself without a middle man. Very satisfied!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

  • Burner Head Cap with Spark Electrode

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerJuan Jose from Miami, FL

Burners corroed by sulphate in the gas

just turn the burners counter clock wise with the help of a jar opener pad. unplug the wire connectors and replace the burners no hassle, no problem. Everything went fine… one thing though, it is not the same color as it was before. I didn’t realize it until opening the box. Previous color was grey. My wife is Ok with it, so I won’t complain, but maybe you should add the color option if there is more than one choice.

Best regards.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 8 people found this instruction helpful

Parts Used

  • Burner Head Cap with Spark Electrode

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerNataly from Brooklyn, NY

One of four burners did not start (no sparks)

Turned burner about a quarter of a turn, lifted, disconnected wires, connected them to a new burner and replaced it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 14