2356992-2-S-Whirlpool-3412D024-26-Sealed Burner Cap with Electrode
2356992-2-S-Whirlpool-3412D024-26-Sealed Burner Cap with Electrode 2356992-1-S-Whirlpool-3412D024-26-Sealed Burner Cap with Electrode 2356992-3-S-Whirlpool-3412D024-26-Sealed Burner Cap with Electrode http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/42431.gif

Sealed Burner Cap with Electrode

PartSelect Number PS2356992

This burner cap assembly is sold with the spark electrode. Please note this part has been redesigned and no longer requires a gasket. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Gas igniter glows, but will not light.
  • Will Not Start.
  • Element will not heat.
  • Gas smell.
  • Compare At

    $34.73
  • You Save

    $5.79
  • Your Price

    $28.94
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 21 reviews What's this?
1-5 of 21
 

128 of 142 people found this instruction helpful

Parts Used

  • Sealed Burner Cap with Electrode

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerMatthew from Brookfield, MA

A burner wouldn't spark strongly enough to light the gas.

Replacement of these burners is very easy. You just twist the burner counterclockwise a quarter turn and pull it out. (You may need a big wrench if the range is very old.) Once out, just pull the two wires off and push them onto the new burner. Crimp them on with pliers if they're loose -- mine were. Twist the burner back on.
If the gasket under the burner has disintegrated, don't worry about it. They don't offer replacements for them because they're not necessary as a safety feature. They were designed to keep overspills from running under the cooktop, but the ridge around the hole is likely higher than you'd ever need.

Help other customers find the most helpful instructions.

Were these instructions helpful?

23 of 24 people found this instruction helpful

Parts Used

  • Sealed Burner Cap with Electrode

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerarnold from la punte, CA

Burner was worn out

Burner head arrived when I got home from work. Just timely to cook for dinner that monday night, got the 4 burners disconnect the element from the old burner, then connect element to the new bunners, in less than 10 mins, and I had save estimate $600 buying a brand new stove or gas range, this will last me another5 to 10 years. Especially this time of recession

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 12 people found this instruction helpful

Parts Used

  • Sealed Burner Cap with Electrode
  • SCREW

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerJohn from Rockaway, NJ

Rusted sealed burner

The burner rusted after years of spaghetti pots boiling over. When I went to twist the the burner to remove it the top portion broke off. This left the bottom side of the burner stuck into the cook-top. I put some 3-in-1 oil on the rusted rim for a day or two. I had to drill the phillips head screw and twist it with a vise grip. I used a pair of pliers to grab the center of the broken-off burner part. After a few tries it broke loose and was out. The rest was easy. I recommend sealing the rim between the burner and the cook-top. I used silicone sealant. This should keep the water from leaking underneath the burner and into the cook-top.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 11 people found this instruction helpful

Parts Used

  • Sealed Burner Cap with Electrode

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

Customerjuan from aurora, IL

Burners would not light and the flame would come out from the bottom of the burner.

A quarter turn counter-clockewise and the burner came out. Disconnect the old wires and connect the new wires. Place the burner in its place and a quarter turn clockwise and it was set.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 14 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerLEVI from LOMPOC, CA

Units were ready to replace

Disconnected the burner cap, unscrewed the drip bowl screws (2), removed the drip bowls, installed the new bowls and reconnected the burner cap. I intended to replace all four drip bowls but two of them came with large chips on the edges. I plan to purchase two replacements soon.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 21