2355584-1-S-Whirlpool-W10250596-Vent Grille
2355584-1-S-Whirlpool-W10250596-Vent Grille 2355584-2-S-Whirlpool-W10250596-Vent Grille

Vent Grille

PartSelect Number PS2355584

This vent grille mounts on the top of the microwave above the door.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $34.45
  • You Save

    $5.74
  • Your Price

    $28.71
On Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 2 reviews What's this?
1-2 of 2
 

8 of 12 people found this instruction helpful

Parts Used

  • Vent Grille

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

Customerwilliam from st james city FL

Plastic grill cover broke in several places

both screw mounts broke off so removal of the grill from the cover was easy.

bent clips that held plastic part of grill to stainless part of grill straight.

tried to separate the two pieces but found that the original pieces were also glued together, made the job more difficult to separate the two.

enter the putty knife, using it between the plastic and the stainless made the job much easier to separate the two.

i didn't scrape off the glue when i put the new plastic grill into the stainless and as a result the two did not fit together and seat as they should have, not the fault of the replacement part, entirely my fault.

everything worked ok but i know that if the glue had been removed, they would have fit perfectly.

replacement part was perfect

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Vent Grille

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRobert from Cincinnati OH

The problem seemed to be in the construction of the grille--too much weight pulling on two screws mounted in plastic. Replacing the part was easy. The question is will it break again since the weak plastic parts have not been strengthened in the replacement grille.

Mounted the new part and screwed it in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2