Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2355583
This stainless vent grille mounts on the top of the microwave above the door.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
The repair was easy beyond my biggest imagination. It took longer to get the part of the box than it did to install it.Three scres and that was it! Less thatn 5 minutes to install.I just find it questionable why so many of these vent covers have to be replaced.(I saw all of the reviews before I purchased the part. Sure seems like a lot of broken covers.) Why do they break so easily and why hasn't KitchenAide made them ar bit more durable.
Help other customers find the most helpful instructions.
Were these instructions helpful?
It's a good thing that the repair/replacement is easy, because this is the 3rd time that I have had to replace the vent grill. They are very cheaply constructed and KitchenAid should be ashamed to put a product this inferior on the market. Both the microwave and stove are a constant source of problems and repairs. I was amzed at the quick service and delivery. The vent grill was ordered on Monday and arrived Wednesday. GREAT SERVICE! Kitchen Aide should take notice.
It was so so easy. Took the two screws out, lined the new vent up with the holes, screwed the screws back in. Done!!!
A Phillips screwdriver was all that was needed. A poor design by KitchenAid for only having (2) bolts holding this stainless steel vent grille in a plastic housing, oh well. Don't lean or pull against it to hard or it will most likely break again.
I just had to remove the screws, and the broken parts of the old grill vent (plastic part that sheared off) and put the new grill vent in place and use the existing screws to attach and that was it!Super easy.
The replacement part was identical to that of the original microwave and arrived in perfect condition.The repair was extremely simple - too screws and a "snap" and it was done.Couldn't be happier with the results. Thanks, Part Select!
Replacement of new vent grille took less than 5 minutes. I just wished Kitchen Aid made a product that lasted longer than 3 years. My part arrived very quickly, less than a week. Service was great and so was your price. I had no problem locating a replacement part. Kitchen Aid would not give me the parts number so I did not know if I was order the right part. But you photo really helped to narrow the correct part. Thanks
Removed the three screws and replaced the with the new vent.
Set in place and installed 2 screws. Took less than 5 min.
Repair took kess than 5 munutes.. Align plastic guides for the Screws and using a Philips screwdriver commence to tightening same .
The part is held in place with two screws. A poor design for sure. The replacement part is a direct fit once the two screws are removed. Reuse the same screws, don't order new ones.
The repair was simple, just unscrew two screws and put the new one on. Took less than five minutes. Easy fix.
Remove two screws, remove grill/bracket, replace grill/bracket, replace two screws and your done. Recycle if You Can.
Removed old screws and pieces of plastic. Replaced new grill vent with old screws. Could not have been any easier
All it took was 2 screws and it was done - could not have been simpler.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.