BBB A-Plus
2353872-1-M-GE-WD12X10278-Single-Lower-Wheel-Stud-Axle.jpg
2353872-1-S-GE-WD12X10278-Single-Lower-Wheel-Stud-Axle.jpg 2353872-2-S-GE-WD12X10278-Single-Lower-Wheel-Stud-Axle.jpg

Single Lower Wheel Stud/Axle

PartSelect Number PS2353872

Sold individually. This is just the axle that holds the wheel in place on the dishrack. The wheel is sold separately.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Not cleaning properly
In Stock

  • Compare At

    $.98

  • You Save

    $.16

  • Your Price

    $0.82
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 NEXT > 1-15 of 21

 

15 of 17 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMaria from wright WY

Wheels on bottom rack were either broken or melted

It was really easy I just snapped the axle and the wheels together and then snapped them onto the rack! simple as that

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerStephen from Maple Valley WA

Part broke after wearing out

pulled the racks out, replaced the broken parts....easy job

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerChris from Decatur GA

Wheel axles are defective - wheels fall off

The part indicated here is a new design to replace a defective part that fails to keep the wheels on the lower dish rack. So far, the new axles work fine. Removal/Replacement couldn't be easier - it is helpful to use needle-nose pliers to get the old axles out. The new ones just snap in. Wheels stay on just fine. The rack is designed to roll on 8 total wheels, 4 on each side.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerEdmund from Long Beach CA

Lower reck wheels and fasteners shot

Took out rack and secured wheels and clips to it

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerPamela from Sylvania OH

Lower wheels kept falling off

Just put axle and wheel together and popped them on. Thank you. I know you saved me a bundle.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMARIEANNE from WOODBRIDGE VA

Wheels missing or broken

...on the lower rack of the dishwasher. I simply snapped the pieces together and then snapped them into place. No tools necessary other than my own two hands (and the scissors I used to cut open the package!)

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

    • Single Lower Wheel Stud/Axle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLaverne from Roselle IL

Pieces that attach the wheels to the lower rack kept falling off

Ordered the new parts and attached to wheels on lower rack. The old pieces clamped on and the plastic stretched out and would not hold any longer. The 8 new pieces have a slightly different design, were easy to intall and I believe will never loosen up.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerEdwin from Waldwick NJ

Wheels kept falling off

Removed the old wheels and studs. Pressed on the new studs and wheels. Viola.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAlfred from Mashpee MA

The lower rack wheels had fallen off and melted

The best money I've spent on a repair. Easy. The lower rack now rolls in and out smoothly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKimberly from Durango CO

Some wheels had broken, was really hard to move rack in and out.

I am NOT handy, but my husband was gone when the wheels and stud/axles came. I was able to replace all of them in about ten minutes with no tools. Easy and no more frustrations!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBill from Parkville MO

Wheel and rollers needed replacing

just exchange new wheels with new studs and popped back in. only thing I needed was to know that mfg had redesigned stud and replaced with quote a better mouse trap.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJoLinda from Littleton CO

Wheel fell off and was melted.

I placed a new snap device into the wheel athen attached it to the lower rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Single Lower Wheel Stud/Axle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGail from Woodstock GA

Axle for wheel was broken

Popped the axle on to the wheel, then snapped it on to the lower drawer - done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerILONA from AUSTIN TX

One wheel was missing, others kept on falling off

Just snapped studs and wheels together and put them into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerchris from Lordsburg NM

Wheels worn out kept coming off

Just snap wheel axle into wheel then snap the whole wheel assembly on to rack.Much better design.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 NEXT > 1-15 of 21