16 of 20 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
CustomerTabatha from Fort Sam Houston TX
Washer would not drain or spin
removed the two screws on the back of the washer that holds the washers top down. Then lifted it up. Unplugged the electrical from the part (made sure to note where they came from). Then unscrewed the two screws, plugged in the electrical, screwed the screws into the back. I am a stay at home mom and I fixed it in under ten minutes. (I also figured out what the problem was:) I had ordered a new washer, but after some research, I saved $1000!