http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/46WLNAIP.gif
See part 25 in the diagram

Soil Sensor and Thermistor Assembly

PartSelect Number PS2352007

The sensor, also known as Turbidity Sensor, measures level of soil in the water and the thermistor is used to regulate water temperature when certain cycles or options are selected. The thermistor is part of the sensor mounted in the tub.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Compare At

    $33.32
  • You Save

    $5.55
  • Your Price

    $27.77
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews What's this?
1-1 of 1
 

20 of 29 people found this instruction helpful

Parts Used

  • Soil Sensor and Thermistor Assembly

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMark from Lancaster NY

Failed diagonistics test for owi sensor

Pulled the dishwasher out from the counter, on the lower right hand side, about mid way back there is a bundle of all yellow wires, follow that to the sensor which mounts into the bottom of the wash tub. The sensor is easily removed by grasping it by hand and turn it about a half turn (can't remember which direction). It then just pulls out. Disconnect the wire bundle by pushing on the retaining clip and the install is the reverse.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1