Quick Question!

Have you ever purchased from PartSelect.com before?

Water Filter

Compare At

$22.16

You Save

$3.69

Your Price

$18.47
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS2351893
Manufacturer Part Number 4378411RB
Manufactured by Whirlpool

This filter comes with push-on fittings and 1/4" John Guest fittings. It is used on refrigerators that do not have built-in water filters.

This part works with the following brands: Estate, KitchenAid, Roper, Whirlpool, Inglis, Kenmore.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

How do u get the old filter out, need a good description..thx.

Lucy for model number WRS325DAW01
Answer:

Hi Lucy, First you will need to turn off your water supply. The easiest and quickest way to remove your old filter from your tubes is to cut it off from both ends. Use a pair of sharp scissors and try to make the cut as straight as you possibly can. This will help make it easier for installing the new filter. If the tubes are not flush in your new filter it will cause a leak. First work on installing the tube on your Inlet side (or the side that has the cap on the end). You will take your tubing and press it into the Inlet portion of your new filter until it cannot go in any farther. You will feel a very slight click into place, as there are push fittings on this filter. For this next part you will need a large bowl or a bucket. Turn your water supply back on and ensure that the water goes through your new filter. What you will see is black water coming out of your filter. That is just the carbon releasing from inside of the part. You need to have your water run through that filter until the water becomes clear again. After your water is completely clear, turn off your water supply again. Install the other tubing that leads to your appliance just like you had done with the inlet side. Pushing the tubing into the port until it cannot go any farther. After you have installed your filter, make sure to run at least 2 - 4 liters of water through your water dispenser in your fridge to make sure that your water has stayed clear. I hope this helps!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

4 of 17 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Louis from Stotts City, MO

No ice

Removed three screws as illustrated in the instructions, disconnected the wiring from ice maker to freezer. Replaced ice maker component in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 15 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Wrench (Adjustable)
Customer: Jolene from West Valley City, UT

The water filter needed to be replaced.

Turned the water off, took off the old filter, added the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2