| |
40 of 54 people found this instruction helpful
Parts Used
-
- Natural Gas to Liquid Propane Conversion Kit
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Wrench set
CustomerDenny from Bishop CA
Bought a new gas oven that did not come with a propane conversion kit.
I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. Then, I checked for leaks and I was then ready to cook.
|
44 of 71 people found this instruction helpful
Parts Used
-
- Natural Gas to Liquid Propane Conversion Kit
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerEd from Orange TX
Stove was set up for natural gas and needed to be converted to lp
The LP conversion kit contained very good, detailed instructions. I replaced the gas orifices, took off the bottom door and adjusted the regulator.
Used the screwdriver to adjust the low flame and everything was done.
|