Quick Question!

Have you ever purchased from PartSelect.com before?

2351422-1-S-Frigidaire-GRLP3-Natural Gas to Liquid Propane Conversion Kit
2351422-1-S-Frigidaire-GRLP3-Natural Gas to Liquid Propane Conversion Kit http://www.partselect.com/Schematics/Frigidaire/NCJ6492M.gif

Natural Gas to Liquid Propane Conversion Kit

PartSelect Number PS2351422

Manufacturer Part Number GRLP3
Manufactured by Frigidaire

This kit is used to convert your appliance to liquid propane.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

Compare At

$33.41

You Save

$5.57

Your Price

$27.84
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

105 of 167 people found this instruction helpful

Parts Used:
  • Natural Gas to Liquid Propane Conversion Kit
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Ed from Orange, TX

Stove was set up for natural gas and needed to be converted to lp

The LP conversion kit contained very good, detailed instructions. I replaced the gas orifices, took off the bottom door and adjusted the regulator.

Used the screwdriver to adjust the low flame and everything was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

92 of 134 people found this instruction helpful

Parts Used:
  • Natural Gas to Liquid Propane Conversion Kit
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Wrench set
Customer: Denny from Bishop, CA

Bought a new gas oven that did not come with a propane conversion kit.

I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. Then, I checked for leaks and I was then ready to cook.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2