2347919-1-S-Whirlpool-W10144820-Water Inlet Valve with Thermistor
2347919-1-S-Whirlpool-W10144820-Water Inlet Valve with Thermistor 2347919-2-S-Whirlpool-W10144820-Water Inlet Valve with Thermistor

Water Inlet Valve with Thermistor

PartSelect Number PS2347919

This part is used to help control and balance the water temperature flowing in to the washer tub.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not stop filling with water.
  • No hot or cold water.
  • Leaking.
  • Will not fill with water.
  • Compare At

    $62.84
  • You Save

    $10.47
  • Your Price

    $52.37
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 4 reviews What's this?
1-4 of 4
 

60 of 96 people found this instruction helpful

Parts Used

  • Water Inlet Valve with Thermistor

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerBarb from Blackriver Falls WI

Fill valve bad

took back off then removed valve replaced with new one works good

Help other customers find the most helpful instructions.

Were these instructions helpful?

24 of 30 people found this instruction helpful

Parts Used

  • Water Inlet Valve with Thermistor

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Wrench set

CustomerMelanie from Farmersville OH

Water would not shut off from running in to washer

contacted "just answer" on web. they diagnosed problem and suggested repair part. Ordered part from "part select". Great service and fast shipping from part select. Replaced part in 15 minutes and up and running! :)

Help other customers find the most helpful instructions.

Were these instructions helpful?

22 of 43 people found this instruction helpful

Parts Used

  • Water Inlet Valve with Thermistor

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench(Adjustable)

CustomerKathleen from Live Oak FL

Plastic intake froze causing a cracked in the hose thread input connection

Removed the back washer panel,unscrew the control/dial panel section from main washer body, remove part. Insert new part and put everything back in place. Really quite simple. DONE.

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 34 people found this instruction helpful

Parts Used

  • Water Inlet Valve with Thermistor

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerPatricia from Rose OK

Water would not stop filling and would overflow flooding floor

replace part, which we received within one and half days and it works great. very satisfied

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4