2347193-1-S-Whirlpool-35-6780-Drain Pump
2347193-1-S-Whirlpool-35-6780-Drain Pump 2347193-2-S-Whirlpool-35-6780-Drain Pump

Drain Pump

PartSelect Number PS2347193

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. NOTE: This is a redesigned part. The pump now mounts on to the base of the washer - no mounting plate needed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Will not drain.
  • Leaking.
  • Burning smell.
  • Pumps but will not spin.
  • Will not agitate.
  • Will Not Start.
  • Shakes and moves.
  • Compare At

    $80.35
  • You Save

    $13.39
  • Your Price

    $66.96
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 39 reviews What's this?
31-39 of 39
 

1 of 2 people found this instruction helpful

Parts Used

  • Drain Pump

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsSocket set

CustomerEdward from Hollywood FL

Pulley insert coming out of pully hitting housing

REPLACED PUMP BECAUSE PULLEY DID NOT COME OFF PUMP WITHOUT BREAKING PUMP IN HALF.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drain Pump

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerKeith from Mount Vernon WA

The water pump was making a horrible grinding sound

The repair was a piece of cake! I actually stumbled upon PartSelect by searching for the part, it happened to be that the part through your company was the cheapest! Not only did that make me and my wallet happy the part came fast and i was able to repair the washer in 15-30 mins!! Thank you PartSelect!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerJulio from Oviedo FL

Bad water pump and clip holding front panel

Replacing the water pump only required the removal of the front Panel, removing and replacing the pump with socket set and then installing front panel with the new clip. Once this was complete the belt drive was installed on the bottom of the washer. Very easy fix.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drain Pump

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Socket set

CustomerKelley from Oklahoma City OK

Belt slipping on bottom of washer-pulley shims on pump slipped out

After taking the motor off (it looked loose to me!) and stripping out the bolts on it, then finding that the bolts holding the motor were permanently affixed to the motor (and they were an odd size not available at the hardware store), I drilled the bolts out and put in new ones (on the motor) and re-affixed the same. I still had a problem. I then went online and found that most people had problems with the water pump. I looked at the pulley on the water pump and found that the inner shims had slipped out on a permanent part (and could not be put back in with the basic tools I had on hand). I ordered the pump online, and replaced the same. Took about 30 minutes after I found the real problem and got the parts in. My pump had a permanent metal disc on the bottom which did not come with the new pump, but the new pump fit without it. Machine works fine now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Drain Pump

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers, Socket set

CustomerCurt from Warner NH

Shrieking noise from washer, then motor seized.

I followed all the instructions from your site. It was very easy. Hardest part was the hose clamps. So it was very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Drain Pump

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers

CustomerChris from Yorba Linda CA

Washing machine noisy due to corrugated metal spacer

After looking at some of the other stories, I realized this was going to be a super easy fix. I moved the washer away from the wall, disconnected all the lines and then removed the pump. Seriously it took about 20 minutes start to finish, and now the washing machine sounds brand new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drain Pump

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Wrench set

CustomerIra from Hollywood FL

Water pump seized up. Pulley ruined gear at bottom

Replaced pump. Works great!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerChristopher from Biloxi MS

Washer would not drain

replaced water pump and belt ,had to shim motor mounts , working pretty good , but still needs some tweaking

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

CustomerFrank from Miami FL

Drain pump making noise. Brass type spacer was crack and hitting the main body.

First removed the top using a putty knife to compress the two clips on front of top. Removed the two self tapping hex head screws at top. Lifted front cover off. Tilted machine back to discover the problem. Removed back access panel to drain pump. Removed pump and replaced with new one. With the machine tilted back, replaced belt.

Also replaced a badly faded control panel. The trick to removing the timer knob was to gain access to the back of the timer. A blue pin is located in the middle which has a shaft the runs into the knob. Using a small screw driver, just pull the pin out enough to release the knob. It does not come all the way out. I had a little difficulty removing the water level control knob and water temp knob. After carefully removing the knobs, I put on a little pressure grease to make it easier next time. Good luck on your repair project and hope this helps too.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-39 of 39