Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS234666
This part works with the following brands: GE, Hotpoint & Kenmore.
First mistake I made was assuming the replacement handle would come with screws. It didn't so had to place a second order for the top screw. Make sure you order everything you need. First I popped off small rim on inside of door with the tip of a knife to expose the lower screw. Removed old handle. Set new handle inplace and tightened both top and bottom screw. Replaced rim to original position. And voila! Done. Easy fix if you have all the necessary parts.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Installed new handle with the two ordered screws. Everything fit. Quick repair. Though I believe the handle to be a little pricy.....when all is finished and all works properly one can overlook what ones feels is a little pricy. Also much cheaper than a entire new unit. Thanks for prompt delivery.
I followed the instructions used by others about removing only a portion of the gasket - just enough to reveal the screws to remove. Five minutes later, I am finished.THIS SITE IS FANTASTIC! THE SERVICE WAS FANTASTIC! I ordered the product on a Wednesday morning and the next day I received it - and that wasn't overnight shipping!You get what you pay for - Parts Select is the best!
unsrew top handle screw on inside of door, removed handle, slid handle plate out slid new one in (probably would not have had to replace this part but the part makes the job look better) removed snap in trim finish around window inside door, fished out old screw and broken plastic from handle, srewed new handle on, snapped trim back on and job was complete.
The Parts select diagram and order ing process made it very easy to complete my repair job. After receiving my parts, I unscrewed the screws with a phillips driver. Then I popped out the handle. There is one tricky part - the screw is a bit too small for the existing whole and so I added a washer to fix this problem. I then slide in the new handle. Very easy!
Ordering was easy! I used the model # on micro and found the diagram which told me exactly what I needed to fix it! It arrived in 2 days from when I ordered and all I really had to do was uncrew the old tap screws using a needlenose plier to hold sheered off end of plastic mount and phillips head to unscrew and then re install new handle! So easy! I didnt even need to wait for my husband to get home!
Had already reverse engineered the door and it's parts so when the repair parts got here I already knew how the parts fit together. Took me 15 minutes max without instructions.
We removed the screws, they were broken so we needed pliers to hold one end of the screw while we twisted the other end. After that we simply screwed the new handle in. I ordered exactly what I needed, the new screws were separate. But I looked at the pictures of the parts and made sure I had the correct parts to finish the job. I did. The parts were there in 2 days and we had the microwave fixed before Thanksgiving.
Repair was super easy. All I had to do pop out the band on the inside of door, remove screws from previous handle. I put new handle in place and screwed back in and pushed the band back into place. Super easy and only took like 10 minutes.
Very simple to replace. I followed another persons comments and it worked in 5-10 min.....the tip on removing the inside screen to expose the lower screw was perfect...i was very pleased with parts select....easy people to talk to and they provided the exact part i needed....i would use them for sure again ! H. Neal Billman Boca Grande, Fla
It took all of 3 minutes to fix! Using a phillips screwdriver, unscrew top screw. I then used a putty knife to pry the seal ring open to reveal the bottom screw. I then used plyers to hold the broken plastic piece and removed the bottom screw. Hold the handle in place and screw in bottom screw, then snap seal ring back into place and replace top screw. I was shocked at how easy this was and also how fast the part was shipped. I was very pleased. Thank You!!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.