1 of 2 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
CustomerLew from Lewiston CA
Ignitor on bar-b-que was broken
1- removed two screws on each side of face plate to expose back side of ignitor.
2- went to garage to get cresent wrench and removed nut from old ignitor.
3- took out old ignitor and removed two wires.
4- put wires on new ignitor, placed ignitor in hole, and tightend nut on ignitor.
5- put face plate back and reinserted screws.
6- tested bar-b-que to ensure everything worked. It did!