http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/59445.gif
See part 1 in the diagram

Control Panel - Black

PartSelect Number PS2344892

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $285.05
  • You Save

    $47.51
  • Your Price

    $237.54
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

5 of 7 people found this instruction helpful

Parts Used

  • Control Panel - Black

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLeon from West Lawn PA

Walked by range, caught clothes on control and broke it off, poorly designed contorl knob

Finally figured out that there were two side screws along with 4 bottom screws. Had to pull range out of island about 3". Turned off power then removed control panel and replaced infinite control. Took about 15 min. Took about 3 weeks to figure out where the two side screws were even after web search. Finally figured it out by pulling out range from island.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

  • Control Panel - Black

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers, Wrench(Adjustable)

CustomerJohn from Hillsboro IL

Oven would not heat - no function from touchpad panel.

First I shut off the power to the stove at the house breaker panel. Next I removed the knobs for the burner controls and removed the two screws holding in each burner switch. Then I removed the two screws on the side of the panel and the four screws on the bottom of the panel. Then the panel could be pulled out to access the clock assembly. Setting the burner switches out of the way, I removed the four screws holding in the clock, unplugged the ribbon cable for the touchpad and removed the clock assembly. Next step was to remove the indicator lights for the burners, The light holders just slide off of the red lenses the stick thru the control panel. The lenses then push out of the panel. At this point the old panel is disconnected and you are ready to install the new panel in reverse order. The process was so easy, my nine year old grandson was able to help me.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2