2344773-2-S-Whirlpool-W10196405-Chrome Drip Bowl - 8"
2344773-2-S-Whirlpool-W10196405-Chrome Drip Bowl - 8" 2344773-1-S-Whirlpool-W10196405-Chrome Drip Bowl - 8" http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/45160.gif

Chrome Drip Bowl - 8"

PartSelect Number PS2344773

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.
  • Compare At

    $4.91
  • You Save

    $.82
  • Your Price

    $4.09
In Stock
Order within the next 3 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drip Bowl - 6"

Part Number 2342029

Sold individually. This part is located beneath the element and catches any spills.

Order within the next 3 hrs and your part ships today!
$3.96
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 38 reviews What's this?
1-5 of 38
 

499 of 507 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJoe from Greeley, CO

Oven wouldn't heat

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new
.

Help other customers find the most helpful instructions.

Were these instructions helpful?

463 of 465 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customersusan from Owasso, OK

Temperature setting no longer readable

The new thermostat knob dial was installed in about a minute, good as brand new! I was concerned, as our range is about 25 years old, and my model number was not listed. But Partselect listed several similar models, and a quick spot check of these showed that the dial appears to be fairly universal for Whirlpool products. The new knob dial fit perfectly! The drip bowls also worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

461 of 462 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDonna from Dallas, TX

Drip bowls were burned and tacky

First I removed the old bowls and replaced them with the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

445 of 526 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Chester, VT

Drip bowls needed to be replaced

took old bowls out, put new bowls in, took a coffee break

Help other customers find the most helpful instructions.

Were these instructions helpful?

217 of 298 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Wrench set

CustomerJon from Oakley, CA

Surface elements quit working

Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.
I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.

Way to go Part Select.com

Jon

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 38