Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2342881
This switch controls the large surface burner. As per manufacture the original screws will damage new switch. New screws are needed.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
This switch controls the stove top surface burner.
no problem slightly different shape than original but labels for wires matched up mounting screws aligned perfectly works great
Help other customers find the most helpful instructions.
Were these instructions helpful?
Don't be put off when you first get the new switch. It's not an exact duplicate to the one your replacing. You will notice that the new switch has 5 electrical connectors and you'll see 6 wires on the old one. start by removing the L1 wire(s) off the old switch, you will see that it actually has 2 wires connected to the same connector. Now connect to the L1 position on the new switch. Continuie with taking one wire at a time off the old switch and connect to the corresponding connector on the new switch (all the connectors are coded the same, ex. L1, P, etc....) Once complete the switch and burner worked perfectly
Remove the 3 screw on the bottom cover, and 2 screw holding the switch and then switch your wires out.
Followed the procedure used in replacing the previous switches. The part came without a bushing needed to adjust the height of the knob sticking above the surface of controls. Fortunately, I could use the bushing from the previous part. I suggest a bushing should be included with this part.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.