6 of 7 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:More than 2 hours
ToolsNutdriver, Screw drivers
Customerwilliam from etowah TN
Ice maker started leaking water from the water valve that inputs water to the appliance.
removed the front cover below the compartment door,removed the 2 screws holding the valve to the case and removed the water lines from the valve.The process was reversed to install the new valve.
2 of 4 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
CustomerFrank from Fairmount GA
Water valve leak
Unbolted valve from wall. Unplugged electical connection then unplugged two water lines by pulling them out of valve. Put in new valve-reinserted electrical plug and water lines. Bolted new valve back to wall.