Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas C - April 5, 2023
Verified Purchase
Nice fit, finish
The handle was just like the OEM handle that came on the microwave. Fit and finish were excellent. Only issues are price seemed high and the plastic ends are probably going to break down to heat rising from the stove. (That is apparently what caused the original failure.
★★★★★
★★★★★
James S - April 11, 2021
Verified Purchase
Works great.
Part was received promptly and is of good quality. Looks great!
★★★★★
★★★★★
David S - September 27, 2018
Verified Purchase
part received but I can't figure out how to attach it
We received the part but I do not see how to remove the old one and attach the new one. Any help with this would be appreciated.
September 28, 2018
Hello David, Thank you for leaving a review on the part ordered. I have sent you an email in regards to installing the part. Hope this helps!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
December 8, 2017
I am looking for the door handle stainless but i only need the pieces that are between the handle and the door which are plastic. Am i forced to buy the whole thing? Whirlpool microwave. Thanks in advance!!
For model number WMH3205XVS1
Hi Mike,
Thank you for your question. Yes, you would have to replace your handle to get those pieces. Those pieces are only made with the handle. Good luck with your repair.
14 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
January 2, 2018
How do you remove the door handle?
For model number wmh1164xvs2
Hi Michael,
Thank you for your question. Before you begin any repair please unplug the appliance from the electrical outlet. You will need to remove the plastic lining around the inside of the door. There are retainer clips holding the liner in place and you will need to use a putty knife to remove it. Depending on the type of microwave you have, you may have to come in from the bottom or from the top to remove the lining. Gently slide the putty knife in between the lining and the frame and go around the frame and gently pry it loose. On the hinge side you will need to come in from the backside to pry the lining off. Once the door lining has been removed, you should see 2 screws securing the handle. Unthread them to remove the old handle and install the new one. Reinstall the door lining and restore power to the microwave. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Eric
August 6, 2019
For my microwave, how to remove old handle and what size screw to use with the new handle w10210887? Thanks!
For model number YWMH1162XVS3
Hello Eric, thank you for your question. To access the handle the inner door frame would have to be removed. To do this you would take a small flat head screwdriver or putty knife and gently pry the inner door panel away from the door. It is held on by small clips. Once the inner panel is removed the screws for the handle will be exposed. Unfortunately, the screw for the handle is not listed in our system. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
February 5, 2019
Old screws too short .Do you have replacements. What size screws are they maybe i can find them somewhere else
Hello Terry, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Brian
March 5, 2019
Bought a new handle, cannot for the life of me get the old one off. What are the tricks? Also, new handle did not come with screws, is that normal?
For model number GMH3204XVS1
Hello Brian, so this is going to fairly simple, but there are a few steps. First unplug the microwave, then remove the top grill with screw driver. Remove the door from the hinges, and place on flat surface. Remove door trim with putty knife. Remove screws holding the inner and outer door panels together. Use flat head screw driver to move the tabs that keep the inner panel in place, and remove it. Then simply unscrew the door handle, and install new one. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
