2342142-1-S-Whirlpool-W10206112-USE WPL 74010141
2342142-1-S-Whirlpool-W10206112-USE WPL 74010141 2342142-2-S-Whirlpool-W10206112-USE WPL 74010141

USE WPL 74010141

PartSelect Number PS2342142

The pilot stays lit all the time and, when the oven is turned on, the flame gets bigger and surrounds the thermocouple. When the thermocouple senses the required heat, the safety valve opens to let the gas flow to the oven burner tube where the pilot flame ignites the gas.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Little to no heat when baking.
  • Compare At

    $36.71
  • You Save

    $6.12
  • Your Price

    $30.59
In Stock
Order within the next 10 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

20 of 23 people found this instruction helpful

Parts Used

  • USE WPL 74010141

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers, Wrench(Adjustable)

CustomerPeter J from Brooklyn NY

Pilot light won't stay lit

First I removed the oven door by pulling straight up off of the hinges in the open postion.
Next remove oven racks,then use 1/4 nutdriver to remove back screws on inside oven bottom plate.Next remove gold nut on silver tube @ pilot connection,then remove 1/4 nuts that hold pilot assembly.Next open top of stove and remove small gold nut "with the thin wire from pilot"attached to the back left of oven control knob.Snake that nut and wire from the top of the stove down to the oven and removethe whole pilot assembly. To install Carefully unroll the new pilot assembly starting from the oven "There are two round holes you need to snake the tube into"and up behind the back & into the stove top. Make your connection@ the oven assembly.Next attach the assembly with the 1/4 screws that you removed,then make your connection"gold screw silver tube" Now push in your oven control knob to alllow gas to flow to the pilot tube and check for leaks with a water @ soap solution. No bubbles no leaks. Light your pilot ....you must hold in the oven knob. Put back in oven plate,,,, 1/4 screws,,,,racks close the stove top ,Put door back on hinges and your done.....HOPE I HELPED,..Pete

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

  • USE WPL 74010141

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers, Wrench(Adjustable)

CustomerStephen from Syracuse NY

The oven part will not come on

I did turn the gas off, then ,used my nutdriver,pliers and wrench{adjustable} to removed the old pilot and put the new one in.I turn
the gas back on and ignite with the lighter and it back on and it is working perfect.Thank you partselect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • USE WPL 74010141

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench set

CustomerBlaine from Oklahoma OK

Thermo couple

Removed old, install new

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • USE WPL 74010141

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Wrench set

CustomerWiley from Leary GA

Pilot light wood not light

Removed the top burner and the door on oven. Took out the bottom plate and the shield on top of the pilot light.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4