2342029-1-S-Whirlpool-W10196406-Drip Bowl - 6"
2342029-1-S-Whirlpool-W10196406-Drip Bowl - 6" 2342029-2-S-Whirlpool-W10196406-Drip Bowl - 6" http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/45160.gif

Drip Bowl - 6"

PartSelect Number PS2342029

Manufacturer Part Number W10196406
Manufactured by Whirlpool

Sold individually. This part is located beneath the element and catches any spills.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $4.75
  • You Save

    $.79
  • Your Price

    $3.96
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Chrome Drip Bowl - 8"

Part Number 2344773

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom. Sold individually.

$4.09
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 27 reviews What's this?
 

214 of 415 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJody from Moweaqua, IL

Heating element for oven broke in two.

Removed the two screws holding the heating element to the back of the oven. Pulled the wires away from the connections of the old element and connected the new element. Reinstalled the screws holding the element to the back of the oven. Easiest repair I've ever done! Replaced the drip pans on the cook top and installed the new clock knobs. Good as new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

210 of 409 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Wrench (Adjustable)

CustomerDonna from Petaluma, CA

Needed to replace chrome drip bowls and replace one of the hold down clip since previous owner used incorrect drip bowls and put pressure on the hold down clip.

Pulled out the electric element from the range, replaced the new drip bowl on three of the burners and then replaced the electric element pushing it into the hold down clip. On the fourth burner, I removed the electric outlet, the previous incorrect drip bowl and had to drill out the broke off hold down clip that was no longer there. Next I placed the new hold down clip in position, alligned and fed the little screw through the hold down clip. I used a vice grip to hold the nut in place and with a screw driver tighened the nut. I placed the drip bowl in place, attached the electric element and slipped it into the new hold down clip. Everything went smoothly and I experienced an excellent repair job. We received prompt service and had no problems. I just hope the used appliance that we bought works now. It looks great. It is for a rental unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

210 of 412 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerLinda from Atlanta, GA

Old drip pans stained

Replaced old drip pans with new ones - very easy - even a 68 yr old lady can do it!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

75 of 81 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:More than 2 hours

Tools

CustomerMichael from Eden, VT

Regular parts replacement/maintenance.

We love our Jenn-Air electric range that we have owned since 1983 and couldn't get parts from where we bought it recently. We called around to Sears and other appliance dealers and they couldn't help us. We found your company searching on the internet and we are very much pleased with your parts listing and your great service. We will be back. Jody and Mike Hayden, Eden, Vt.

Help other customers find the most helpful instructions.

Were these instructions helpful?

129 of 250 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

Customercindy from Sebeka, MN

One of my burners would only work half the time, and you had to wobble it to make it work

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, connected the new element using the wire caps, and finished bye rescrewing the element backinto place.

Help other customers find the most helpful instructions.

Were these instructions helpful?