2341924-1-S-Whirlpool-W10192799-Accumulator Filter
2341924-1-S-Whirlpool-W10192799-Accumulator Filter 2341924-2-S-Whirlpool-W10192799-Accumulator Filter

Accumulator Filter

PartSelect Number PS2341924

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Not draining.
  • Compare At

    $78.86
  • You Save

    $13.14
  • Your Price

    $65.72
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 22 reviews What's this?
16-22 of 22
 

2 of 5 people found this instruction helpful

Parts Used

  • Accumulator Filter

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Wrench(Adjustable)

CustomerHarry from camas WA

Dishes not getting clean. Tear in the filter.

Removed the bottom tray. Removed the two clips in the top tray guides and removed the top tray. Removed the top spray arm and transfer tube by unclipping it from the top and at the back and then rotated it down and out. Removed the six screws around the upper pump housing and removed it along with the bottom spray arm. Removed the three screws holding the filter protector plate and removed it. Removed the two screws holding the accumulator / flow plate and removed it. Put it back together in reverse order careful to not over tighten the screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMonty from Las Vegas NV

The filter was dirty so the dishes came out dirtier than when I put them in.

Called a repairman, watched him take apart the base where the filter is. Took about 8 screws.
Told him the handle was broken. Asked him what he had to do to take out the handle. He told me all the screws around the inside of the door. Then he told me it was $284.00 to fix it. Thought about buying a new one, then went online to Partsselect.com. Talked with a tech, ordered the filter and the handle. Put the filter in and put back in the 7-8 screws. Then I put in the latch. It plugs into the main board with 2 wires that just slip back in. Took a little to snap the handle into place because I was afraid I would break it, but it's pretty tough. Put back in the screws around the door and it has worked fine since then. Note on screws: They are the funny shaped ones that fit the screwdriver or drill bit in sets that no one thinks they will ever use. By the way the parts cost about $50. with overnight shipping. Saved $230.00 for a half hour of my time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

Tools

Customerphilip from akron OH

Dishes not cleaning properly

also had to replace heating element. Had to remove dishwasher from under counter to get to heat element. Initial installer used long braided steel water line and plug in electrical connection so removal was easy (10 min). Pulled (2) electrical terminals from heat element and (2) plastic retaining nuts put in new element w/matching nuts,element came w/seals. Check for leaks before installing back under counter. Then removed torx screws holding impeller cover and accumulator/filter removed old put in new after good cleaning of course. All is well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerjoy from Sugar Land TX

Poorly washed dishes, smelly dishwasher & broken handle

Each repair took about ten minutes of easy effort to install. Anyone can do this! You can too!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Accumulator Filter

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers

CustomerGeorge from Jasper MO

Filter clogged

Went fine..video made it easy..one of the best instructional

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Accumulator Filter

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDavid from Kingston RI

Food debris on dishes; seeds stuck in spray arms

Remove mid and bottom rack. The nut on the bottom spray arm can be removed by hand; all screws are T-20; just hold on to the impeller to turn its screw. I keep a T-20 under the sink, which tells you something about how reliable we've found this model! Remove screws as you go down, replace parts as you go back up; assembly is reverse of removal, yadda, yadda. Don't miss opportunities to notice how Maytag keeps making small improvements to many of the parts, wonder whether in a few more years of purchasing replacement parts for this thing it will finally stop breaking. My wife informs me that plastic mesh filters like Maytag uses are something she buys for her lab as disposable single use items. We actually had a Bosch on order (metal filters) but I decided to give this unit one more infusion of parts. It's working better now, but I don't know how long it will last before something else gives out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

25 of 671 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerPAUL from FULLERTON CA

Dishwasher wasn't getting dishes clean and was leaving food debris.

Removed the screws that held the spray arm. Remove dthe screws that held the flow filter flow plate assembly. Removed screw holding the impeller. Thoroughly cleaned all spray arms and associated tubing. Reassembled parts. Installed air gap assembly between dishwasher and garbage disposal (which I should have 4 years ago). Unit runs fine now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16-22 of 22