11749476-1-M-Whirlpool-WPW10170081-Rear Bearing
Part Location Diagram of WPW10170081 Whirlpool Rear Bearing
See part 16 in the diagram
( Grid squares measure 1x1 inch )
11749476-1-S-Whirlpool-WPW10170081-Rear Bearing Part Location Diagram of WPW10170081 Whirlpool Rear Bearing
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Rear Bearing WPW10170081

Rated by 4 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 8.09
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11749476
Manufacturer Part Number WPW10170081
Manufactured by Whirlpool
Product Description

Rear Bearing Specifications

Used in Mixers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WPW10170081 replaces these:
AP6016192, 9703570, W10170081
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
noise in trans.
took it apart. more grease all over. Put in all but one gear on the top. The noise is still there going to try to but the old bearings in and try again. I went back to the old worm gear and allmost all the noise stopped. I did put the new bearings in and the other gears. It seems that the gear on the worm gear was cut wrong. The noise was tear able. I tried the different parts I ordered one at a time. To find out which one stopped the noise. Every time I took a part I had grease all over. It took so long every time I put in a new part to put the trans back together again. I had grease all over.
Read less
Other Parts Used:
Rear Bearing Front Bearing Worm Gear Worm Following Gear
  • Leonard from WORTH, IL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
gears and bearing failure
inspected and replaced worn components
Other Parts Used:
Rear Bearing Front Bearing Gearcase Housing with Gasket Transmission Gasket Worm Gear Worm Following Gear Thrust Bearing Kit
  • Gary from Hamburg, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worm gear stripped.
Removed mixer motor housing by removing 5 obvious screws.
Removed plastic transmission cover by removing 4 obvious screws.
Down load parts exploded drawing from PartSelect.com
Found the worn part by the shiny teeth on the large gear.
Found the large worm gear on the drawing and ordered the gear, and associated bearings. Did not need the seal.
Removed worn part, assembled new gear and beargings in same manner as the worn part, and placed new part in mixer.
Replaced transmission cover gasket.
Repacked grease from transmission cover onto the new gear.
Replaced transmission cover (4 screws).
Replaced mixer motor housing (4 screws).
Replaced mixer trim band around the motor houseing joing. (1 screw).
Plugged it and and it works, good as new.
Read less
Other Parts Used:
Rear Bearing Front Bearing Transmission Gasket Worm Gear Thrust Bearing Kit
  • Stephen from Colorado Springs, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mixer Made Very Bad Grinding Noise, And Would Skip While Making Bread Dough
1, Removed trim piece (1 screw) 2, removed cover (4 screws) 3, removed speed switch assembly (2 screws) 4, removed gear cover (4 screws) 5, removed and examined 2 worm gears for wear. Gear cover was badly cracked, don"t know if it was caused by a previous repair or by heat, as old cover is plastic. Received new parts and installed them, 2 bearings, 2 worm gears, 1 new cover of diecast metal and a new gasket. All repairs made with a #2 phillips screw driver. My wife then made bread, and it preformed flawlessly.
Read less
Other Parts Used:
Rear Bearing Front Bearing Worm Gear Worm Following Gear
  • Dennis from Lake Mills, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
75 of 88 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Gearcase Housing with Gasket
$60.08
$60.08
  In Stock
Worm Gear
$48.11
$48.11
  In Stock
Transmission Gasket
$12.98
$12.98
  In Stock
Front Bearing
$8.09
$8.09
  In Stock
Worm Following Gear
$18.30
$18.30
  In Stock
Hub Gear
$22.09
$22.09
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749476
Manufacturer Part Number: WPW10170081
Brand
Model Number
Description
KitchenAid
4KB25G1XBU3
Mixer
KitchenAid
4KB25G1XBU5
Mixer
KitchenAid
4KB25G1XBY5
Mixer
KitchenAid
4KB25G1XCO5
Mixer
KitchenAid
4KB25G1XER3
Mixer
KitchenAid
4KB25G1XER5
Mixer
KitchenAid
4KB25G1XGA5
Mixer
KitchenAid
4KB25G1XMC5
Mixer
KitchenAid
4KB25G1XMY5
Mixer
KitchenAid
4KB25G1XOB3
Mixer
KitchenAid
4KB25G1XOB5
Mixer
KitchenAid
4KB25G1XTG3
Mixer
KitchenAid
4KB25G1XTG5
Mixer
KitchenAid
4KB25G1XWW3
Mixer
KitchenAid
4KB25G1XWW5
Mixer
KitchenAid
4KD2661XMC3
Mixer
KitchenAid
4KG25G0XMC4
Mixer
KitchenAid
4KG25G0XWH4
Mixer
KitchenAid
4KG25G7XER4
Mixer
KitchenAid
4KG25G7XOB4
Mixer
KitchenAid
4KG25G7XSL4
Mixer
KitchenAid
4KG25G7XWH4
Mixer
KitchenAid
4KG25H3XER5
Mixer
KitchenAid
4KG25H3XOB5
Mixer
KitchenAid
4KG25H3XSL5
Mixer
KitchenAid
4KG25H3XWH5
Mixer
KitchenAid
4KN15C1XER1
Mixer
KitchenAid
4KN15C1XMC1
Mixer
KitchenAid
4KN15C1XOB1
Mixer
KitchenAid
4KN15C1XWH1
Mixer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Rear Bearing
$ 8.09
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.