Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/54089.gif
See part 1 in the diagram
http://www.partselect.com/Schematics/Maytag/54089.gif

PANEL- CON

PartSelect Number PS2341106

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$231.05

You Save

$38.51

Your Price

$192.54
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

3 of 4 people found this instruction helpful

Parts Used:
  • PANEL- CON
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: william from santee, CA

Startt button on control panel not working

Inspected the ribbon cable coming from the control panel to the circuit box and with the aid of a magnifying glass spotted a small rust spot on the ribbon cable connection plug. Ordered a new panel that comes with the ribbon cable attached. Plugged the new one in and it works perfectly. Water tends to run down inside the door, collect on the ribbon cable causing rust on the cable itself. When disconnecting or connecting the ribbon cable be sure to pull the white collar on the connection plug reciever, this releases the cable and clamps on the new cable.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • PANEL- CON
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Scott from Cambridge, OH

Start stop switch would not respond

I removed the front panel surround screws and exposed the control panel bolts.. Next I used a 1/4 inch nutdriver to remove old control panel.. Then I unplugged printed circuit strip.. I bolted new control assembly in place and plugged in printed circuit strip.. It now works like a new machine.. The delivery on replacement part was fantastic.. I actually had it the next day without next day postage! I highly recommend this company for their value pricing and fantastic service! Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2